Accessories - ASCOM Myco SH1 User Manual

User Manual
Ascom Myco SH1 Wi-Fi and Cellular Smartphone
16 Battery cover lock
17 Battery Pack
18 Clip (17.3 Replace the Hinge-type Clip
19 WLAN antenna, and GPS antenna
20 Color pad for clip
3.1.1 Home button
• Press to return to the Alert view.
• Press to wake the display from sleep mode. (As the "Power" button)
• Long press to show running apps, with the possibility to close apps, or switch between
apps.
3.1.2 Volume button, Up and Down
• Press Up to increase, press Down to decrease, the speaker and the loudspeaker volume.
• Press several times to mute notification sounds or silence the ring signal for an incoming
call.
To set the default volume, see
3.1.3 Power button
• Long press to switch the handset on.
• Press to wake the display from sleep mode. (As the "Home" button).
• Press to put it to sleep.
• Long press switch the handset off.
3.1.4 Proximity sensor
Puts the screen automatically into sleep mode, when holding the handset close to the head,
to avoid unintentional screen presses. When moving the handset away from the head, the
screen turns back on automatically.
3.1.5 Color pad for clip
Used to differentiate the handsets between, for example, workgroups, shifts, or roles. The
blue color pad is attached by default, and it can be exchanged by one of the colors, red,
yellow, and green.
3.2

Accessories

Battery Pack
Spare clip
Safety cord
Color pad kit for clip
2 April 2015 / Ver. A
3. Description
(3.1.5 Color pad for clip
5.3.1 Volumes
(14.2.3 Replace Color Pad for Clip
A replacement Battery Pack may be replaced and charged
separately in the battery pack charger.
The replacement hinge-type clip is especially designed to fit
one-layered fabric, like shirt pockets.
The Safety Cord is attached around the clip to prevent to drop
the handset.
The color pad can be attached to the clip, and is used to easily
identify the handset belonging to, for example, a workgroup,
shift, or role.
on page 51.)
on page 11.)
on page 20.
on page 39)
TD 93066EN
11