Top Priority Bar; Alert Classification; Alert Prioritization - ASCOM Myco SH1 User Manual

Wi-fi and cellular
Table of Contents

Advertisement

User Manual
Ascom Myco SH1 Wi-Fi and Cellular Smartphone
Alert notifications in the Top display will remain, until they are acted upon. After one minute
of inactivity the Top display will turn off, in order to save battery capacity.
The icons used for alerts are the same, used in the main display, refer to
Icons
on page 28.
Alert priority beacon (Ändra till heading 2 när alla kommentarer är rättade)
When the Front display is in sleep mode, the alert type is shown with different colors on the
Alert priority beacon. The Alert priority beacon flashes for 10 seconds and then turned off,
in order to save battery capacity.
7.3

Top priority bar

The alert of highest priority is shown in the Top priority bar. If there are several active alerts
with the same priority, the oldest is shown.
By tapping the Top priority bar a detailed view of the alert with acknowledge options is
shown. By handling the alert, the next alert in line (oldest for highest priority) is shown in
the Top priority bar.
7.4

Alert Classification

NOTE: An Alert is associated with colors (a priority color, or a sort color, type, and icon).
Alerts are prioritized depending of priority. A high priority alert always overrides a
lower priority alert.
7.5

Alert Prioritization

Alerts are prioritized depending on their type in the order shown below (from high (1) to
low (4) priority):
IMPORTANT: A "Code Blue" (crisis), or high priority alert is always prioritized as high priority
High priority
Low priority
7.5.1
Alert Priority Color
NOTE: The Alert Priority Colors follow the MDD standards and cannot be altered, however in
some configurations the alert sort color can be shown instead of alert priority color.
2 April 2015 / Ver. A
7. Alert View
(1), and always overrides any system warning, or phone call!
1
"Code Blue" (crisis) alert/high priority alert/system warning
2
Phone call
3
(Medium/Low) Alert
IMPORTANT: A "Code Blue" (crisis) alert, or high priority alert is
always prioritized as (1).
4
Conversation
TD 93066EN
7.5.2 Alert Type
27

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Myco SH1 and is the answer not in the manual?

Questions and answers

Table of Contents