Table of Contents
Advertisement
User Manual
Ascom Myco SH1 Wi-Fi and Cellular Smartphone
7.
Alert View
The Alert view is the default view in the Ascom Myco interface. From the Alert view, it is
possible to view and respond to alerts initiated from third party equipment, such as patient
monitors and nurse call systems. It is also possible to receive information from other
sources, such as system broadcast messages and lab results.
NOTE: The Alert view may be used in several different system setups. Depending on setup
and configuration, the appearance and functionality of the Alert view may differ.
7.1
Alert View
Press the "Home" button to return to the Alert view.
The Alert view displays incoming alerts in a list sorted in order of arrival. A new Alert is
indicated with an alert prioritization color, or sort color code, and location, and alert time,
depending on system configuration.
Scroll the list down, to show additional alerts.
In the example shown below, a high priority alert has just been triggered in room 3, bed 3 by
a patient monitor signalling a high heart rate.
7.1.1
View an Alert
Tap the Alert to view additional information.
7.1.2
Respond to Alert
Tap the appropriate button, such as "Reject" or "Accept".
7.2
Top display
When the Front display is in sleep mode, the alert type, location and priority is shown in the
Top display. If several alerts are active at the same time, the alerts are cycled with the
highest prioritized and oldest alert presented first, followed by additional lower prioritized
alerts.
When unlocking the front display, the Top display turns off.
2 April 2015 / Ver. A
7. Alert View
TD 93066EN
26
Advertisement
Table of Contents
Need help?
Do you have a question about the Myco SH1 and is the answer not in the manual?
Questions and answers