Swisscom Top S324 ISDN User Manual page 94

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / pabx.fm / 13.10.2003
Using with a PABX
Auto keypad
This setting automatically changes the signalling to keypad while dialling after * or # are
entered. This automatic changeover is required for commands made to the telephone
exchange or PABX.
Dial * and #
After activating Dial * and # the characters * and # are sent as commands to the
telephone exchange or PABX while dialling.
Independent of the above setting options, it is automatically switched over to tone
dialling (DTMF) after dialling or during the call e.g., to remotely control an answering
machine.
v
s
Base Settings
s
Settings
~
OK
s
System settings
s
Spec. function
s
Dial properties
s
Standard dial
Activating/deactivating the keypad during a call
In addition to the ongoing settings described above, you can also switch over
temporarily to the keypad.
The setting is only applicable to the current external call and is automatically
deactivated after the call is ended.
v
either ...
s
Keypad on?
~
or ...
s
Keypad off?
92
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 61).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select and confirm the desired setting, e.g.,
OK
Standard dial (
Open the menu.
Activate the keypad:
Select the menu item and confirm.
OK
Enter the keypad code.
Deactivate the keypad:
Select the menu item and confirm.
OK
‰
= on).