Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003
Using the directory and other lists
Voice-activated dialling
With voice-activated dialling, you can dial a phone number by simply speaking the name
of the party in your handset you wish to call. First you have to create a directory entry
and say the name one time for this entry, i.e., a voice pattern of the name must be
stored in your handset.
The voice patterns are saved in voice directories. You can create up to four different,
user-specific voice directories. They are named by factory default, User 1 to User 4. Each
user must say his own voice pattern and store this in his voice directory.
The voice directory contains all directory entries. Entries which already have a voice
pattern saved for the set user are marked with a
You can save up to 29 voice patterns, distributed among users.
Recording a voice pattern for an existing directory entry
Record your voice pattern in quiet surroundings.
s
s
R[RRRRRRRRRRRRRRRRRRR]
Voice
s
User 2
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
record.
OK
a
To change the voice pattern, you must delete it (page 41) and record it again.
If your two recordings are too different from each other, you will be
◆
prompted to repeat them.
i
A message tells you if your speech pattern is too much like another
◆
user's. Close this message with
pattern recording sequence and repeat the recording.
Using voice-activated dialling
t
The display prompts you to speak. Speak the voice pattern, e.g. Anna. If the name
matches the recorded voice pattern, it is repeated. The phone number is dialled.
40
´
Step 1: Open the directory for voice-activated
dialling:
Open the directory.
Select the entry and press the display key.
Select and confirm, e.g. User 2.
OK
Step 2: Begin recording:
Press the display key.
Confirm the display prompt. Speak the name when
prompted to do so by the display. Repeat the name
when prompted again to do so. Your recording is
stored automatically.
Hold down (return to idle status).
Ý
Hold down.
.
, go back to the start of the voice
Need help?
Do you have a question about the Top S324 ISDN and is the answer not in the manual?