Identify Caller - Swisscom Top S324 ISDN User Manual

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / telephony.fm / 13.10.2003
Answering a ringback
The handset rings with a special ring and the display shows the ringback number.
c
Checking and deleting a ringback
Deleting the ringback while it is incoming
The handset rings and the display shows the ringback number.
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
DELETE
Checking or deleting the ringback before it is incoming
v
s
Base Settings
s
Status
s
Callback
either ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
DELETE

Identify caller

Identify caller is used to identify annoying or threatening callers.
Prerequisite: This service feature can only be requested from your network provider in
justified cases.
Activate this function during the call or immediately after the caller has hung up. You
must not end the call yourself.
i
You must not press the end call key!
v
s
Identify caller
The caller is identified in the telephone exchange and is recorded by phone number,
time and date. A printout of the list is sent later by your network provider.
Press the talk key. The connection is established.
Press the display key. The ringback is deleted.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm. The status list is
OK
‰
displayed ( = is activated).
Select the menu item and confirm. The current
OK
ringback number is shown on the display.
To check:
Press the display key. The ringback remains active.
To delete:
Press the display key. The ringback is deleted.
Open the menu.
Select the menu item and confirm.
OK
Making calls
25