Operating The Base - Getting Started Wizard - Swisscom Top S324 ISDN User Manual

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003
Preparing to use your phone
Changes you have not confirmed or saved by pressing
will be discarded.
OK
Example of menu operation: "Setting Handsfree Volume"
v
1.
s
2.
v
3.
OK
or
v
4. or
OK
r
5.
6.
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
Save
a
7.
Operating the base – Getting started wizard
A few settings are necessary before using your telephone. The Getting started wizard is
designed to help you with this. It can be opened anytime using your handset. The
following settings can be set one after the other.
Date and time
◆
Find enter the MSN of your connection
◆
Set the device type for the connected device
◆
Set the incoming MSN
◆
Set the outgoing MSN
◆
Outside line code (when using a PABX)
◆
What is an MSN?
MSN = Multiple Subscriber Number. Up to ten different phone numbers can be applied
for to utilise the ISDN multi-device connection (MultiLine). An MSN is one of the phone
numbers without the area code assigned by you.
Your telephone uses the MSN according to your preferences. There are two types:
Incoming MSN: phone numbers which can be used to call you. You can assign the
◆
incoming MSN to specific internal parties (handsets). Incoming calls are only routed
to the handsets assigned the respective incoming MSN.
Outgoing MSN: phone numbers identified to the person called. The outgoing MSNs
◆
are used for invoicing by the network provider. Each internal party can be assigned
a fixed outgoing MSN.
Potential internal parties are:
Handsets, which can be assigned the internal phone number 11 to 16.
◆
Data modules (page 90), which can be assigned the internal phone numbers 41 to
◆
46.
14
Press right side of the control key. This opens the menu.
Keep pressing the lower part of the control key until you see Audio
Settings marked in the display (by the frame).
Use the right side of the control key or the display key
confirm.
Confirm the first display entry, Handset Volume
side of the control key or with the display key
Press the left or right side of the control key to select the required
volume (1–5).
Press the display key to save the setting.
Press and hold the End call key to return to the idle status.
, , , or with Save
OK
Yes Save Send
OK
using the right
,
.
OK
to