Setting Up Automatic Call Forwarding When Not Reaching A Handset - Swisscom Top S324 ISDN User Manual

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003
Setting the system

Setting up automatic call forwarding when not reaching a handset

If your handset is out of the radio range of the base station, the battery is flat, or the
handset has been deactivated, a call will be forwarded to one of the external phone
numbers you specify (e.g., a mobile phone).
Prerequisites:
You have exclusively assigned the handset its own incoming MSN (page 66). This
◆
MSN must not be assigned as the incoming MSN for any other device, not even the
ISDN bus!
Call forwarding can only be set up for one incoming MSN on the base.
◆
By factory default, automatic call forwarding is not set up.
v
s
Base Settings
s
Settings
~
OK
s
ISDN settings
s
Auto.forwarding
s
v
~
s
Save entry
The line set up for automatic call forwarding is marked in the list of set-up call
forwarding lines.
74
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 61).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select call fowarding line, e.g., MSN1: Anna.
Open the submenu.
Enter 'call to' number and open the submenu.
Select the menu item and confirm. Automatic call
OK
forwarding is activated (
‰
= on).