Operating With Other Devices; Data Modules Gigaset M101 Data And M105 Data; Gigaset Repeater - Swisscom Top S324 ISDN User Manual

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / devices.fm / 13.10.2003

Operating with other devices

Operating with other devices

Data modules Gigaset M101 Data and M105 Data

Using Gigaset M101 Data with V24 interface and Gigaset M105 Data with USB interface,
you can establish a wireless connection from your PC to the base station, e.g., for
Internet access.
For installation, see the installation instructions on the CD-ROM enclosed with the data
module.

Gigaset repeater

The Gigaset repeater can be used to increase the range of your handsets. You can use
up to 6 repeaters on your base. To successfully install the repeater, the repeater
capability of the base must be activated.
Activating/deactivating repeater capability
This function is used to activate or deactivate the repeater capability.
By factory default, this repeater capability is deactivated.
v
s
Base Settings
s
Settings
~
OK
s
System settings
s
Spec. function
s
Repeater
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
NEXT
Registering the repeater
Prerequisite: Gigaset repeater is deactivated (power connector unplugged).
1. Press the illuminated registering key on the base station. The key flashes. The base
station is ready for registering only when the key is flashing.
Make sure that during this process, no other base stations in registering
i
mode are located near the Gigaset repeater.
2. Plug in the power connector on the Gigaset repeater. The LED on the Gigaset
repeater flashes. After a brief time period, the LED is lit continuously which displays
that registering is complete and that it is ready for operation.
Please refer to the operating instructions of the Gigaset repeater for further
information.
90
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 61).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Press the display key to save the setting. The handset
goes off briefly (
‰
= activated).