Restoring The Factory Settings - Swisscom Top S324 ISDN User Manual

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003
In other countries, different long distance prefixes could be used. In this case you need
to change this setting.
Otherwise, you wouldn't be able to make some calls, such as ringbacks, from the call
list.
v
s
Base Settings
s
Settings
~
OK
s
ISDN settings
s
Lg.-dist. code
s
National : 0
v
s
Change number
~
s
Save entry

Restoring the factory settings

You can select which type of reset should be performed:
Operational – All MSNs and access codes (outside line code) are deleted. The
authorisations are reset to "dial and answer".
Reset all – All functions are reset to their factory defaults. The system PIN is reset to
"0000". All entries (calls list, charges) are deleted.
The following applies to both functions: Before resetting, switch all active
i
call forwardings off! The handsets remain registered.
v
s
Base Settings
s
Settings
~
OK
s
System settings
s
Spec. function
s
Factory setting
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 61).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select type of long distance prefix,
e.g., National : 0.
Open the submenu.
Select the menu item and confirm.
OK
Enter a new or changed long distance prefix and
open the menu.
Select the menu item and confirm.
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 61).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Setting the system
79