Swisscom Top S324 ISDN User Manual page 40

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003
Using the directory and other lists
Sending a single entry or complete list to a handset
You can send single entries or the complete list to another handset that is registered on
the same base. This avoids entering information twice. VIP settings, stored voice
patterns and speed dial digits are not sent.
C
s
or
s v
either ...
s
Copy Entry
or ...
s
Copy List
... then
~
OK
After an entry has been sent you are asked if you want to send another entry. If you
confirm with the display key
finished sending, press the display key
The successful transfer of data is confirmed with a message and with the confirmation
tone at the receiving handset. Existing entries in the receiving handset are retained.
Entries with identical numbers are not overwritten. The number of entries that are
stored in the receiving handset may therefore differ from the number of entries that you
have sent to it.
The transfer is cancelled if the phone rings or if the memory of the receiving handset is
full. The last entry to be transferred appears in the display.
38
Open the directory or speed dial list.
Select an entry and open the menu.
Send a single entry:
Select the menu item and confirm.
OK
Send complete list:
Select the menu item and confirm.
OK
Enter the internal number of the receiving handset
and confirm. Sending is initiated.
you can select more entries to send; once you have
Yes
to end it.
No