Swisscom Top S324 ISDN User Manual
  1. Manuals
  2. Brands
  3. Swisscom Manuals
  4. IP Phone
  5. Top S324 ISDN
  6. User manual
Swisscom Top S324 ISDN User Manual

Swisscom Top S324 ISDN User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Gigaset S100 / SWZ dt / A31008-S100-F102-1-2X19 / cover_0.fm / 13.10.2003
ISDN
Top S324
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Swisscom Top S324 ISDN

Summary of Contents for Swisscom Top S324 ISDN

  • Page 1 Gigaset S100 / SWZ dt / A31008-S100-F102-1-2X19 / cover_0.fm / 13.10.2003 ISDN Top S324 User Manual...
  • Page 2 Gigaset S100 / SWZ dt / A31008-S100-F102-1-2X19 / cover_0.fm / 13.10.2003...

  • Page 3: The Handset At A Glance

    ◆ Star key Ringer on/off (press for ◆ approx. 2 seconds) Toggles between upper/ ◆ Hash key lower case and digits Keypad lock on/off Microphone (hold down) Recall key Swisscom key Initiate enquiry call for spec. directory open: short press...

  • Page 4: Table Of Contents

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnIVZ.fm / 13.10.2003 The handset at a glance ..... . 1 Safety precautions ......5 Preparing to use your phone .
  • Page 5 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnIVZ.fm / 13.10.2003 Making cost-effective calls ....47 Displaying call charges ..........47 Using several handsets .
  • Page 6 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnIVZ.fm / 13.10.2003 Adjusting the loudspeaker volume ........85 Changing the ringer tone .

  • Page 7: Safety Precautions

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / sec_hints.fm / 13.10.2003 Safety precautions Safety precautions Only use the power supply unit supplied, as indicated on the underside of the device. Only insert the recommended, rechargeable batteries (page 97) of the same type! Use no other types of batteries or non-rechargeable batteries, as they could damage health and cause personal injury.
  • Page 8 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / sec_hints.fm / 13.10.2003 Safety precautions This product does not support SMS (Short Message Service). ◆ Not all of the functions described in these instructions are available in ◆ all countries.

  • Page 9: Preparing To Use Your Phone

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Preparing to use your phone Package contents The package contains: one base station, ◆ one handset, ◆ one power supply unit with power cord, ◆ one ISDN cable, ◆...

  • Page 10: Connecting The Base

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Connecting the base ISDN connection Cable duct (NTBA) Telephone plug Underside of with ISDN cable base (enlarged view) Plug in the small plug on the ISDN cable into the socket (it clips into place), ◆...

  • Page 11: Operating The Handset

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Operating the handset Removing the protective film The display is protected by a plastic film. Please remove the protective film! Inserting the batteries Insert the batteries ensuring correct polarity (see figure on left). ◆...
  • Page 12 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Registering the handset and charging the batteries When you place the handset into the base, it automatically registers. This can be done as follows: 1. Place the handset turned off in the base with the display up. 2.
  • Page 13 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Activating/deactivating the handset To activate the handset, press the end call key and hold. You will hear a confirmation tone (rising tone sequence). To deactivate the handset while in the idle status, press the end call key again and hold (confirmation tone).

  • Page 14: Using The Handset - And Menus

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Using the handset – and menus Special keys Control key The control key is the central operating element. It has four black arrows and the corresponding icons.
  • Page 15 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone The various displays have the following meaning: Display If you press the key icon Þ Last number redialkey: Open the list of the last 10 phone numbers you dialled. OK key: Confirm menu function or confirm entry and save.

  • Page 16: Operating The Base - Getting Started Wizard

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Changes you have not confirmed or saved by pressing or with Save Save Send will be discarded. Example of menu operation: "Setting Handsfree Volume" Press right side of the control key. This opens the menu. Keep pressing the lower part of the control key until you see Audio Settings marked in the display (by the frame).
  • Page 17 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Examples for assigning MSNs: You have ordered four MSNs, two for business use (MSN1, MSN2) and two for private use (MSN3, MSN4). Four handsets are connected to one base. Two handsets (Int.11 and 12) are for business use, two handsets (Int.13 and 14) are for private use.
  • Page 18 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Setting the date and time: Depending on the network provider, the date and time are adopted automatically from the telephone network during the first outgoing call. The display shows: Enter time? Press the display key to set the date and time.
  • Page 19 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Setting the incoming MSN The display shows: Set incoming MSN? The incoming MSN is used to answer incoming calls. The MSNs allocated to your ISDN connection can be allocated to various end devices according to your preferences.
  • Page 20 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 13.10.2003 Preparing to use your phone Using with a PABX: Only carry out the following steps if you want to connect your telephone to a private PABX (not directly to a NTBA). The display shows: Operate behind PABX? Press the display key to confirm the prompt.

  • Page 21: Making Calls

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / telephony.fm / 13.10.2003 Making calls Making calls Making and ending external calls External calls are calls into the public telephone network. Two external calls can be made at the same time on your base. Enter the phone number and press the talk key.

  • Page 22: Answering A Call

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / telephony.fm / 13.10.2003 Making calls Starting a group call to all internal parties You can make a group call from any handset to all other registered internal parties entered for group calls (page 75). By factory default, this option is activated. Initiate an internal call.
  • Page 23 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / telephony.fm / 13.10.2003 Making calls Ð Ext. call from Phone number or "Anna" 0891234567 Incoming MSN, receiving a call Private REJECT RNG OFF Unavailable will be displayed in the display if the phone number of the caller is not transferred.

  • Page 24: Handsfree Talking

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / telephony.fm / 13.10.2003 Making calls Handsfree talking Activating/deactivating handsfree talking Activating while dialling: Enter the phone number and press the handsfree key (instead of the talk key Activating during a call: Press the handsfree key. Deactivating handsfree talking: Press the talk key As soon as you end handsfree talking you switch to "earpiece mode"...

  • Page 25: Rejecting A Call

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / telephony.fm / 13.10.2003 Making calls Rejecting a call You get an external call or you are making a call and receive an external call. The call is signalled acoustically as well as is shown in the display on all handsets of this MSN group.

  • Page 26: Defining The Outgoing Msn For The Next Call

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / telephony.fm / 13.10.2003 Making calls Defining the outgoing MSN for the next call Even if you have defined an individual outgoing MSN for the handset (page 67), you can select another MSN as outgoing MSN before each call, e.g., for individual recording of charges.

  • Page 27: Identify Caller

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / telephony.fm / 13.10.2003 Making calls Answering a ringback The handset rings with a special ring and the display shows the ringback number. Press the talk key. The connection is established. Checking and deleting a ringback Deleting the ringback while it is incoming The handset rings and the display shows the ringback number.

  • Page 28: Functions During A Call

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / during.fm / 13.10.2003 Functions during a call Functions during a call Muting the handset You can mute your handset during a call, e.g. if you wish to talk confidentially to another person in the room. Your party on the line cannot hear your conversation during this time.
  • Page 29 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / during.fm / 13.10.2003 Functions during a call Establishing a connection to a second external party: Enter the second party's phone number. The connection can also be established using the directory or other lists (page 32). Second external party dialled is busy: Press the display key to return to the first party.
  • Page 30 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / during.fm / 13.10.2003 Functions during a call Establishing a connection to an internal party: either ... Enter the number of the internal party you want. or ... Press the display key. [RRRRRRRRRRRRRRRRRRRRRRRRRRR] LIST Select the required internal number, Int.11 e.g., Int.11 , and confirm.

  • Page 31: Forwarding An Incoming Call - Cd (Call Deflection)

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / during.fm / 13.10.2003 Functions during a call Conference switching Prerequisite: You have established an enquiry call (page 26 or page 27). There is an active connection (the one established with the enquiry call) and one on hold (the first).

  • Page 32: Working With Call Waiting For An External Call - Cw (Call Waiting)

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / during.fm / 13.10.2003 Functions during a call Working with call waiting for an external call – CW (Call Waiting) Prerequisite: CW (Call Waiting) set up, see page 76. You hear the call waiting tone (short beep) if you receive an external call while conducting a call (internal or external).

  • Page 33: Call Hold

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / during.fm / 13.10.2003 Functions during a call Call hold Hold external party You are conducting an external call. Press the display key . The external party is on hold. The waiting external party hears the waiting melody (page 78), when the connection is on hold internally (page 77).

  • Page 34: Using The Directory And Other Lists

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Using the directory and other lists Directory and speed dial list You can store up to 200 phone numbers in the directory and the speed dial list, depending on the size of individual entries, and on the number of entries in the speed dial list.
  • Page 35 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Storing a phone number in the directory Open the directory. Confirm. New Entry Create an entry Enter the phone number. Scroll to the next line and enter the name. either ...
  • Page 36 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Scroll to the Enter key: line and select a digit (0, 2– 9) for this phone number. Press the display key to save the setting. [RRRRRRRRRRRRRRRRRRRRRRRRRRR] Save ...
  • Page 37 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Copying and changing a directory entry So that you do not have to enter a similar entry twice, you can create a copy and then edit that entry.
  • Page 38 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Marking a directory entry as VIP You can mark directory entries of callers who are particularly important to you as 'VIP' Æ (Very Important Person) using the key.
  • Page 39 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Adding a displayed phone number to the directory When a phone number appears in the display (CLIP) you can add it to your directory. This can be done while dialling from the last number redial list, from the calls list or during a call.
  • Page 40 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Sending a single entry or complete list to a handset You can send single entries or the complete list to another handset that is registered on the same base.
  • Page 41 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Saving an anniversary to a phone number You can save anniversaries, such as a birthday in the directory and be reminded of this (reminder call). So that the anniversary can be signalled with a ringer melody, you must enter a time.

  • Page 42: Voice-Activated Dialling

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Voice-activated dialling With voice-activated dialling, you can dial a phone number by simply speaking the name of the party in your handset you wish to call. First you have to create a directory entry and say the name one time for this entry, i.e., a voice pattern of the name must be stored in your handset.
  • Page 43 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Announcing the caller's name When you receive an external call, you hear the ringer and the telephone announces the caller's name. Prerequisite: Calling Line Identification is active (page 20) and you have recorded a voice pattern for the incoming number (page 40).

  • Page 44: Display Available Memory

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Changing a user name You can change the user names (User 1 to User 4). Open the directory. Select an entry and press the display key. R[RRRRRRRRRRRRRRRRRRR] Voice Select the user and confirm,...

  • Page 45: Automatic Redial

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Defining the MSN for the next call You can select a valid outgoing MSN only for this call even when dialling from the last number redial list.

  • Page 46: Opening Lists With The Message Key

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Opening lists with the Message key You can use the Message key to open the following lists if there is a new entry there: 1.
  • Page 47 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Opening calls lists You can open both calls lists using the menu. The list of missed calls can also be opened using the key, if it is a new entry (page 44). New entries in the list of missed calls are signalled by the key flashing and by a confirmation tone.
  • Page 48 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 13.10.2003 Using the directory and other lists Displaying the entry Open the list of missed or answered calls (page 45). Now: Select an entry and open the submenu. Select the menu item and confirm. Display entry Changing the phone number of the caller Open the list of missed or answered calls (page 45).

  • Page 49: Making Cost-Effective Calls

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / charges.fm / 13.10.2003 Making cost-effective calls Making cost-effective calls Displaying call charges The costs displayed on the handset and the charges made by the network provider may differ. It is always the network provider's charges which must be paid.
  • Page 50 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / charges.fm / 13.10.2003 Making cost-effective calls Activating/deactivating the charges of the last call You can display the total charges and the charges of the last call for this handset on the handset. By factory default, Last charge is deactivated. Open the menu.

  • Page 51: Using Several Handsets

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / several_handsets.fm / 13.10.2003 Using several handsets Using several handsets Using a handset as a room monitor With this function, a previously stored internal or external phone number is called when a set noise level in the room is reached (the baby cries). When you answer the call you hear the noise in the baby's room.
  • Page 52 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / several_handsets.fm / 13.10.2003 Using several handsets Activating the room monitor function and entering the 'call to' number for the first time Step 1: Open the input field for the room monitor: Open the menu. Select the menu item and confirm.
  • Page 53 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / several_handsets.fm / 13.10.2003 Using several handsets Changing previously set external 'call to' numbers Prerequisite: You are in the input field for the room monitor (step 1, page 50). Scroll to the Call to: line and press the display key. R[RRRRRRRRRRRRRRRRRRRR] Edit Û...

  • Page 54: Setting The Walk And Talk Mode

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / several_handsets.fm / 13.10.2003 Using several handsets Deactivating the room monitor Press the display key on the room monitor handset to deactivate the room monitor function. To reactivate the room monitor function with the same phone number, you must turn on the activation again and save with Save Setting the Walk and Talk mode...
  • Page 55 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / several_handsets.fm / 13.10.2003 Using several handsets Activating/deactivating the Walk and Talk mode Open the menu. Select the menu item and confirm. Add. Features Select the menu item and confirm. Walk and Talk Deactivate the Walk and Talk mode: Press the display key.

  • Page 56: Date And Time

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / time_calendar.fm / 13.10.2003 Date and Time Date and Time Setting the date and time The date and time are transferred from the telephone exchange when you make your first call with your device. You can choose between the 12 hour and the 24 hour display (factory setting) for the time (a.m.
  • Page 57 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / time_calendar.fm / 13.10.2003 Date and Time Scroll to the Time: line and enter the hours/minutes QM15 in a 4-digit format, e.g., "7:15 a.m.". When in 12-hour mode (page 54): [RRRRRRRRRRRRRRRRRRRRRRRRRR] am/pm press the display key if you want to switch between am and pm.

  • Page 58: Setting Appointments

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / time_calendar.fm / 13.10.2003 Date and Time Setting appointments You can have your handset remind you of up to five appointments. To do this, you have to save the times. Activating and setting appointments Open the menu.

  • Page 59: Displaying Missed Appointments, And Anniversaries

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / time_calendar.fm / 13.10.2003 Date and Time Cancelling an appointment Open the menu. Select the menu item and confirm. Calendar/Clock Confirm. Set Appoints. Select the appointment (1-5) and confirm. Appoint. 2 Select setting Off. Press the display key to save the setting.

  • Page 60: Night Service

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / time_calendar.fm / 13.10.2003 Date and Time If there is a new appointment/anniversary in the list, the display ◆ shows . You can also use this display key to open the list of Appoint appointments/anniversaries.
  • Page 61 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / time_calendar.fm / 13.10.2003 Date and Time or ... Set the internal forward destination: Select the menu item and confirm. Internal Select the internal number, e.g., Internal 11. Internal 11 ... then Press the display key to open the submenu. Confirm.
  • Page 62 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / time_calendar.fm / 13.10.2003 Date and Time Activating/deactivating Saturday/Sunday all day Night service: If Sat/Sun all day is set, then Night service is active between the indicated start and end times from M-F, and all day on weekends. If Sat/Sun all day is deactivated, then calls are forwarded on the weekend between the set start and end time.

  • Page 63: Security Settings

    Do not forget the new system PIN! If you forget it, the device will require technical intervention for which a charge will be made. In this case, contact the Swisscom Hotline. Defining authorisation You can set different authorisations for all registered devices: Unrestricted (set as factory default) ◆...

  • Page 64: Emergency Numbers

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / security.fm / 13.10.2003 Security settings Internal only ◆ The devices can only make and answer internal calls. Emergency numbers can be dialled. Open the menu. Select the menu item and confirm. Base Settings Select the menu item and confirm.
  • Page 65 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / security.fm / 13.10.2003 Security settings Enter a new emergency number (up to 32 digits) or change the existing emergency number. You can pick the number from the directory or speed dial list Press the display key to open the submenu. Confirm.

  • Page 66: Setting The System

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Setting the system The abbreviations in parentheses after the titles stand for the respective ISDN performance feature. Some performance features can only be used if it is enabled by the network provider (possible additional costs).

  • Page 67: Setting Up/Deleting Isdn Phone Numbers (Msn)

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Setting up/deleting ISDN phone numbers (MSN) Your ISDN connection offers you two simultaneously usable telephone lines (B channels). Up to ten phone numbers (MSN) can be set up on your base station. Setting up ISDN phone numbers (MSN) / changing the name If you haven’t saved all the phone numbers with the Installation wizard (page 14), you can enter them now.

  • Page 68: Assigning A Phone Number (Msn)

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Deleting ISDN phone numbers (MSN) Open the menu. Select the menu item and confirm. Base Settings Select the menu item and confirm. Settings Enter system PIN, if needed (page 61). Select the menu item and confirm.

  • Page 69: Setting Up The List Of Outgoing Msn For The Next Call

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Assigning the outgoing MSN By default, no outgoing MSN is entered. The telephone exchange adds the outgoing MSN. You can define one outgoing MSN per internal party. This MSN will be displayed to your partner when you call and the call will be billed to this MSN.

  • Page 70: Setting Up A Busy Signal When The Msn Is Being Used (Busy On Busy)

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Setting up a busy signal when the MSN is being used (Busy on Busy) This setting allows callers to get a busy signal immediately when an external call is already being made on this MSN, independent of the setting Call waiting.

  • Page 71: Setting Up Rejecting For The Entire Msn Group

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Setting up rejecting for the entire MSN group You can reject an external call not only on your handset, but for all members of an MSN group. Pressing will give the caller a busy signal instead of a ringing tone.
  • Page 72 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Activating/deactivating internal call forwarding Prerequisite: Internal call forwarding can only be activated if the forward destination is set up. Open the menu. Select the menu item and confirm. Base Settings Select the menu item and confirm.
  • Page 73 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Setting up the forward destination Open the menu. Select the menu item and confirm. Base Settings Select the menu item and confirm. Ext. call forw. Enter system PIN, if needed (page 61). The list of set up call forwarding is displayed.
  • Page 74 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Changing an entry Open the menu. Select the menu item and confirm. Base Settings Select the menu item and confirm. Ext. call forw. Enter system PIN, if needed (page 61). Select call forwarding number, e.g., MSN1 to 22222.

  • Page 75: Pre-Assigning The Call Deflection Destination - Cd (Call Deflection)

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Switching external call forwarding internal/external Your ISDN connection offers you two simultaneously usable telephone lines (B channels). You can set up your telephone so that: the call forwarding is done at the telephone exchange (external), so that your ◆...

  • Page 76: Setting Up Automatic Call Forwarding When Not Reaching A Handset

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Setting up automatic call forwarding when not reaching a handset If your handset is out of the radio range of the base station, the battery is flat, or the handset has been deactivated, a call will be forwarded to one of the external phone numbers you specify (e.g., a mobile phone).

  • Page 77: Setting Up An Internal Group Call Group

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Setting up an internal group call group You can make a group call from any handset to all other registered internal party (page 20). In the basic settings, all registered parties of device type "telephone" or "Neutral" are set up in the group call group.

  • Page 78: Activating/Deactivating Call Waiting - Cw

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Picking up a call during ring delay see page 22. Open the menu. Select the menu item and confirm. Base Settings Select the menu item and confirm. Settings Enter system PIN, if needed (page 61).

  • Page 79: Setting An External/Internal Enquiry Call

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Setting an external/internal enquiry call Your ISDN connection offers you two simultaneously usable telephone lines (B channels). You can set up your telephone so that: when an enquiry call is made during an external call to another external party, the ◆...

  • Page 80: Setting Up The Waiting Melody

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system Setting up the waiting melody An external party hears the set waiting melody when the connection is on hold in the base (internal) (page 77). An external party whose connection is on hold in the telephone exchange (external), and an internal party who is on hold, will not hear a waiting melody.

  • Page 81: Restoring The Factory Settings

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system In other countries, different long distance prefixes could be used. In this case you need to change this setting. Otherwise, you wouldn't be able to make some calls, such as ringbacks, from the call list.

  • Page 82: Checking The Status

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003 Setting the system either ... Restore the functionality: Select the menu item and confirm. Operational or ... Restore factory settings: Select the menu item and confirm. Reset all Checking the status The status of the following settings can be checked: Ringback ◆...

  • Page 83: Registering/De-Registering Further Handsets

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / registering_hs.fm / 13.10.2003 Registering/de-registering further handsets Registering/de-registering further handsets You can register up to six wireless devices to your base (handsets or data modules M101data, M105data). A Classic S127 or Top S327 handset that is not yet registered on a base is registered automatically.
  • Page 84 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / registering_hs.fm / 13.10.2003 Registering/de-registering further handsets 2. On the handset (within 30 seconds) Open the menu. Select the menu item and confirm. Settings Select the menu item and confirm. Register H/Set Select base (1–4) and confirm, e.g. Base 1. Base 1 Enter the system PIN of the base (Factory default: 0000) and confirm.
  • Page 85 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / registering_hs.fm / 13.10.2003 Registering/de-registering further handsets De-registering handsets You can de-register any registered handset from any registered Classic S127 and Top S327 handset. Open the menu. Select the menu item and confirm. Base Settings Select the menu item and confirm.

  • Page 86: Handset Settings

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_hs.fm / 13.10.2003 Handset settings Handset settings Your handset is pre-set. You can change the settings to suit your requirements. Changing the display language You can view the display texts in different languages. Open the menu.

  • Page 87: Changing The Name Of The Base

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_hs.fm / 13.10.2003 Handset settings Changing the name of the base The names " e 1? to "Base 4" are assigned automatically. You can change the name of your base. The name of the base is handset-specific, i.e. the base receives the name which was assigned by the handset.

  • Page 88: Changing The Ringer Tone

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_hs.fm / 13.10.2003 Handset settings Changing the ringer tone A range of options are available: Six volume levels: ◆ ˆ – Five volume levels (1–5; e.g. volume level 2 = ‰ – 'Crescendo' call (6; the volume increases with each ring = Ten melodies (1–10;...
  • Page 89 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_hs.fm / 13.10.2003 Handset settings Individual settings for internal calls, wake-up and appointments You can set the ringer individually for an internal call, wake-up call, or appointment. You can also set all calls the same. Open the menu.

  • Page 90: Activating/Deactivating Advisory Tones

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_hs.fm / 13.10.2003 Handset settings To deactivate the ringer in the idle status, press the key and hold until the key until Ú icon appears. The ringer cannot be re-activated while an external call is in progress.

  • Page 91: Restoring The Handset To Factory Settings

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_hs.fm / 13.10.2003 Handset settings Restoring the handset to factory settings You can reset individual settings and changes you have made. This will not affect entries in the directory, the calls list or the speed dial list and the handset's registration to the base that you have installed.

  • Page 92: Operating With Other Devices

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / devices.fm / 13.10.2003 Operating with other devices Operating with other devices Data modules Gigaset M101 Data and M105 Data Using Gigaset M101 Data with V24 interface and Gigaset M105 Data with USB interface, you can establish a wireless connection from your PC to the base station, e.g., for Internet access.

  • Page 93: Using With A Pabx

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / pabx.fm / 13.10.2003 Using with a PABX Using with a PABX Access code (outside line code) Prerequisite: If your phone is connected to a PABX you may have to enter an access code (outside line code) for external calls when first getting started, depending on the PABX.
  • Page 94 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / pabx.fm / 13.10.2003 Using with a PABX Auto keypad This setting automatically changes the signalling to keypad while dialling after * or # are entered. This automatic changeover is required for commands made to the telephone exchange or PABX.
  • Page 95 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / pabx.fm / 13.10.2003 Using with a PABX Activating the keypad for the next connection All dialling characters (0–9, *, #) will be sent as a string of keypad characters with the next connection (dial and call). In the connection status, the keypad is retained and is not automatically switched over to tone dialling (DTMF).

  • Page 96: Appendix

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / appendix.fm / 13.10.2003 Appendix Appendix Care Wipe the base and handset with a damp cloth (use no solvent) or an antistatic cloth. Never use a dry cloth. This can cause static. Contact with liquid If the handset should come into contact with liquid, on no account switch the device on.
  • Page 97 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / appendix.fm / 13.10.2003 Appendix What has happened Possible cause Possible solution when … … You can't dial a phone The long distance prefix has Check the long distance prefix number any longer? changed. and correct it (page 78).

  • Page 98: Guarantee/Maintenance/Repair/Approval

    Assistance If you have any general enquiries about our products or services please contact the Swisscom information helpline (Freephone 0800 800 ). Approval and conformity This handset can be used throughout the Swiss ISDN network. Country-specific requirements have been taken into consideration. Should you have any queries relating to differences between the public telephone networks please contact your service provider or specialist dealer.

  • Page 99: Specifications

    The Declaration of Conformity (DoC) has been signed. In case of need a copy of the original DoC can be made available via the company hotline. The Declaration of Conformity can be viewed on: www.swisscom.com under the heading eShop, Telephones, Declarations of Conformity, or can be ordered by post from...

  • Page 100: General Specifications

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / appendix.fm / 13.10.2003 Appendix General Specifications Feature Value DECT standard is supported GAP standard is supported No. of channels 60 duplex channels Radio frequency range 1880–1900 MHz Duplex method time multiplex, 10 ms frame length Channel grid 1728 kHz Bit rate...

  • Page 101: Character Set Chart

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / appendix.fm / 13.10.2003 Appendix Character set chart Standard characters Press the relevant key repeatedly or hold it down. 2 x 3 x 4 x 5 x 6 x 7 x 8 x 9 x 10 x 11 x 12 x 13 x 14 x £...

  • Page 102: Predictive Text

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / appendix.fm / 13.10.2003 Appendix Order of directory entries The directory entries are sorted alphabetically as a rule, but spaces and digits have first priority. The sorting order is as follows: 1. Space (shown here as 2.

  • Page 103: Compatibility

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / appendix.fm / 13.10.2003 Compatibility Compatibility You can see in the list which functions are supported by your handset or by handsets of other manufacturers. A maximum of 4 handsets can be registered (also see page 81). Function Classic S117...

  • Page 104: Menu Table

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / menuetree.fm / 13.10.2003 Menu table Menu table Main menu In the main menu, you can also select a menu function by opening the menu and keying in the digit combination ('shortcut'). v 5 2 4 Example: for "set ringer for the alarm clock".

  • Page 105: Submenu "Base Settings

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / menuetree.fm / 13.10.2003 Menu table Submenu "Base Settings" To begin: With the handset in idle status press Base Settings Status Callback Withhold no. ‰ = on Call forwarding Ext.occupations Missed calls (phone number list) -> Calls list menu (page 44) Accepted calls (phone number list) ->...
  • Page 106 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / menuetree.fm / 13.10.2003 Menu table Int. call forw. Activate? or Deactivate? – if call forwarding is activated Forward. dest. List of internal parties No. of rings (enter the number) Night service Activate? Deactivate? List of MSN –...

  • Page 107: Directory Key And Speed Dial List Key

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / menuetree.fm / 13.10.2003 Menu table *T Net Box ® (fixnetbox Spec. function Factory setting Operational Reset all Dial properties Standard dial Auto keypad Dial * and # Repeater SW version Ext.room monit. Change number 'Call to' number display Delete number...

  • Page 108: Accessories

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SAG_Accessories.fm / 13.10.2003 Accessories Accessories Handsets Turn your product into a cordless telephone system: ISDN Handset Top S327 / Top 324 Large illuminated graphic display with date and time ◆ Directory for around 200 entries ◆...
  • Page 109 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SAG_Accessories.fm / 13.10.2003 Accessories Gigaset repeater V2 The Gigaset repeater can be used to increase the reception range of your handset (except other makes of handset) to the base.

  • Page 110: Isdn Glossary

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / glossary.fm / 13.10.2003 ISDN glossary ISDN glossary AOC-D Advice of Charge: During the Call. Transfers the charge information during the connection. AOC-E Advice of Charge: at the End of the Call. Transfers the charge information at the end of the connection.
  • Page 111 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / glossary.fm / 13.10.2003 ISDN glossary Call waiting CW, Call Waiting. Performance feature of network provider. A signal tone is given during a call when another caller calls. ISDN telephones also signal this on the display.
  • Page 112 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / glossary.fm / 13.10.2003 ISDN glossary are not identical, and the phone number of C is displayed if C permits his phone number to be displayed. COLR (Connected line identification restriction) The phone number of C is not displayed to A if C has set up COLR. Conference switching See "Three-way conference call"...
  • Page 113 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / glossary.fm / 13.10.2003 ISDN glossary Handsfree talking The handsfree unit of the telephone allows not only listening to, but also speaking with the party via a built-in microphone while the handset is not picked up. This allows others in the room to take part in the call.
  • Page 114 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / glossary.fm / 13.10.2003 ISDN glossary Multi-device connection ISDN connection that has up to ten MSN available, in contrast to the system connection with one call director number block. This is the most commonly used type of ISDN connection for private customers.
  • Page 115 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / glossary.fm / 13.10.2003 ISDN glossary Repeater With a repeater you can increase the range of handsets connected to a base telephone. This device receives the wireless signal of the base telephone and broadcasts it further. Ring delay For each internal party, you can specify how many rings take place before this party hears the ring.
  • Page 116 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / glossary.fm / 13.10.2003 ISDN glossary Unplugging on the bus TP, Terminal Portability. Also called parking. An incoming call can be put on hold for up to three minutes in the local telephone exchange, so that for example another telephone, another fax machine, or a PC can be used.

  • Page 117: Index

    Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnSIX.fm / 13.10.2003 Index Index Missed ..... . Setting ..... . Access code .
  • Page 118 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnSIX.fm / 13.10.2003 Index Deactivating ....Date and time ....Calling back a caller .
  • Page 119 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnSIX.fm / 13.10.2003 Index Saving an entry with a new name Send ..... . . Gesprächskosten anzeigen .
  • Page 120 ..... . Activate/deactivate ... . . Swisscom key ....Changing the volume .
  • Page 121 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnSIX.fm / 13.10.2003 Index Appointment ....Phone cord ..... Move cursor .
  • Page 122 ......Handset (individual) ... . Swisscom key ....Handset volume .
  • Page 123 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnSIX.fm / 13.10.2003 Index Talk key ....Telephone Care ..... . . Contact with liquid .
  • Page 124 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnSIX.fm / 13.10.2003 Index...
  • Page 125 Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / SX_150isdnSIX.fm / 13.10.2003 Index...
  • Page 126 Gigaset SX100isdn / englisch / A31008-X150-G102-1-2X19 / cover_back.fm / 13.10.2003 A3 1 0 0 8 - X1 5 0 - G1 0 2 - 1 - 2 X1 9 7 611552 016109...

Table of Contents