Swisscom Top S324 ISDN User Manual page 84

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / registering_hs.fm / 13.10.2003
Registering/de-registering further handsets
2. On the handset (within 30 seconds)
v
s
Settings
s
Register H/Set
s
Base 1
~
OK
s
Int.11
The handset returns to idle status after registration is complete. The internal number of
the handset appears in the display.
The handset cancels the base search after 60 seconds. If registration has
i
not completed within this time period, repeat the process.
Manual registration:
Older handsets of the same make and other GAP-capable handsets
The following describes how to register older handsets or handsets of other GAP-
capable devices.
GAP Generic Access Profile = European standard for the interaction of handsets and
bases of other manufacturers.
If the internal numbers Int.11 to Int.16 on your telephone have already been assigned,
please de-register another handset which is no longer needed before registering
(page 83).
1. On the handset
Start to register the handset as described in its operating instructions.
2. On the base
÷
The handset is automatically assigned the lowest unassigned internal number from the
number range Int.11 to Int.16.
82
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e.g. Base 1.
OK
Enter the system PIN of the base (Factory default:
0000) and confirm. In the display are
Regstr.Procedure and the name of the base (e.g.,
Base 1).
If the handset has found the base, the list of available
internal numbers is shown in the display.
Select and confirm the internal number, e.g., Int.11 .
OK
Press the Registration/Paging key on the base for
approximately 3 seconds. Registration is initiated.