Martin MAC Encore Performance CLD User Manual page 29

Menu level 1 Menu level 2
POWER ON TIME
POWER ON
CYCLES
INFORMATION
SW VERSION*
RDM UID*
LED TYPE*
FAN SPEEDS*
TEMPERA-
TURES*
RATE
QUALITY
DMX LIVE*
START CODE
STROBE ...
CONTROL
TEST ALL
TEST LEDS
TEST*
TEST EFFECTS
TEST PAN/TILT
RESET
MANUAL
STROBE ...
CONTROL*
CONTROL
Menu level 3 Menu level 4
0 ... XXX HR
TOTAL
CLEAR
RESETTABLE COUNTER? YES/
NO
0 ... XXX HR
TOTAL
CLEAR
RESETTABLE COUNTER? YES/
NO
XX.XX.XX
4D50.XXXXXXXX
COLD/WARM
HEAD FAN 1...
0 - XXX RPM
BASE FAN 3
CMY EFFECT ...
X C
DC/DC
0 - 44 HZ
0 - 100%
0 - 255
...
PAN
TILT
RESET
0 - 255
Table 3: Control menus
Control panel menus
Notes (Default settings in bold print)
Display hours fixture has been powered on
since manufacture (not user-resettable)
Display hours fixture has been powered on
since last counter reset (user-resettable)
Display number of times fixture has been
powered on since manufacture
(not user-resettable)
Display number of times fixture has been
powered on since last counter reset (user-
resettable)
Displays currently active software version
Displays fixture's unique RDM ID
Displays fixture's LED color temperature
type
Displays current speed of all cooling fans
(head and base)
Displays temperature in °C of all PCBs
DMX transmission speed in packets per
second
Percent of packets received
Value of the DMX start code
Scroll to see values being received on
each DMX channel
Run test sequence of all functions
To test a specific function, use Up/Down
buttons to scroll through functions and
pause. Press Enter to restart test
sequence.
Press Menu button to exit test.
Run test sequence of LEDs only.
To test a specific LED group, use Up/Down
buttons to scroll through groups and
pause. Press Enter to restart test
sequence.
Press Menu button to exit test.
Run test sequence of effects.
To test a specific effect, use Up/Down
buttons to scroll through effects and
pause. Press Enter to restart test
sequence.
Press Menu button to exit test.
Run test sequence of pan functions. Press
Menu button to stop test
Run test sequence of tilt functions. Press
Menu button to stop test
Reset fixture
Scroll through effects, then enter a DMX
value to manually control an effect
29