Martin MAC Encore Performance CLD User Manual page 24

Channel
33
24
DMX Value Function
Fixture control/settings
(hold for number of seconds indicated to activate)
0 - 9 No function (disables calibration) – 5 sec.
10 - 14 Reset entire fixture – 5 sec.
15 No function
16 Reset color only – 5 sec.
17 Reset beam only– 5 sec.
18 Reset pan and tilt only – 5 sec.
19 - 22 No function
23 Linear dimming curve – 1 sec.
(menu override, setting unaffected by power off/on)
24 Square law dimming curve – 1 sec.
(menu override, factory default setting, setting unaffected by power
off/on)
25 Inverse square law dimming curve – 1 sec.
(menu override, setting unaffected by power off/on)
26 S-curve dimming curve– 1 sec.
(menu override, setting unaffected by power off/on)
27 No function
28 Fast pan and tilt speed – 1 sec.
(default setting, menu override - setting returns to MENU setting after
power on/off)
29 Smooth pan and tilt speed – 1 sec.
(menu override - setting returns to MENU setting after power on/off)
30 Parameter shortcuts = ON
31 Parameter shortcuts = OFF
32 Focus tracking = OFF
33 Enable focus tracking at close range – 1sec.
34 Enable focus tracking at medium range – 1sec.
35 Enable focus tracking at long range – 1sec.
36 Video tracking = ON – 1sec.
37 Video tracking = OFF – 1sec.
38-40 No function
41 Beam smoothing = ON – 1sec.
42 Beam smoothing = OFF – 1sec.
43-51 No function
52 Turn on control panel display – 1 sec.
53 Turn off control panel display – 1 sec.
54 Regulated fan speed, fixed light output intensity – 1sec.
55 Full fan speed, regulated light output intensity – 1sec.
56 Medium fan speed, regulated light output intensity – 1sec.
57 Low fan speed, regulated light output intensity – 1sec.
58 Ultra-low fan speed, regulated light output intensity – 1sec.
59-60 No function
61 Hibernation mode = ON – 5 sec.
62 Hibernation mode = OFF – 5 sec.
63-64 No function
65 Pan and tilt limits = ON – 5 sec.
66 Pan and tilt limits = OFF – 5 sec.
67 Store current pan position as lower pan limit – 5 sec.
68 Store current pan position as upper pan limit – 5 sec.
69 Store current tilt position as lower tilt limit – 5 sec.
70 Store current tilt position as upper tilt limit – 5 sec.
71 Reset pan and tilt limits and disable pan/tilt limit functionality – 1sec.
72 Tungsten Emulation = ON – 1sec.
73 Tungsten Emulation = OFF – 1sec.
74 Alternative light source (color temperature shift) = ON – 1sec.
75 Alternative light source (color temperature shift) = OFF – 1sec.
76-99 No function
100 Enable calibration – 5 sec.
101 Store pan and tilt calibration – 5 sec.
102 Store dimmer calibration – 5 sec.
103 Store cyan calibration – 5 sec.
104 Store magenta calibration – 5 sec.
105 Store yellow calibration – 5 sec.
106 No function
MAC Encore Performance User Guide
Table 1: DMX Protocol
Fade Default
type value
Snap 0