Introduction; About This Guide - Extron electronics DTP CrossPoint 4K Series Setup Manual

Introduction

This section gives an overview of the Extron
DTP CrossPoint 4K Series matrix switchers and describes their
features. Topics that are covered include:
•

About this Guide

About the DTP CrossPoint 4K Series
•
About this Guide
NOTE:
the DTP CrossPoint 4K Series User Guide and the IPCP Pro
Series User Guide, at www.extron.com.
This guide provides instructions for an experienced installer to
set up and operate the Extron DTP CrossPoint 4K Series matrix
switchers. Step by step instructions show you how to:
Connect the hardware (see
•
Perform basic operations from the front panel (see
•
Operations
Use selected SIS commands (see
•
Response Table for Matrix Switcher Commands
Load and start the control programs (see
•
Coniguration Software
Conigurator Program
Connect to the built-in HTML pages (see
•
pages, on page 33)
For more information on subjects in this guide, see
on page 17)
on page 30 and
on page 31)
DTP CrossPoint 4K Series • Introduction
on page 4)
Rear Panel
SIS Command and
Starting the Product
Starting the DSP
Accessing the HTML
Front Panel
on page 24)
1