Extron electronics DTP CrossPoint 4K Series Setup Manual page 33

Command
HDCP status
View input HDCP status
View HDCP status of all inputs
View output HDCP status
View HDCP status of all outputs
Input reports as an HDCP-authorized device
HDCP-authorized device on
HDCP-authorized device off
View HDCP-authorized status
Execute Auto-Image
Execute Auto-Image
List Digital Sync Validation Processing (DSVP)
List sync of all inputs
Example
(DTP CrossPoint 108):
NOTE:
X! = Input number
X@ = Output number
X$ = HDCP status (for inputs)
X% = HDCP status (for outputs)
X^ = HDCP-authorized device
X& = Scaled output number
X* = Signal detection status
SIS Command Response
(Host to Unit) (Unit to Host)
E X! } X$]
I HDCP
E IHDCP } X$ X$ X$
1 2
E X@ } X%]
O HDCP
E } X% X% X%
OHDCP 1 2
E X! } X!
E *1HDCP HdcpE
E X! } X!
E *0HDCP HdcpE
E X! } X^]
E HDCP
X& X&]
*A Img
0LS X* X* X*
1 2
0LS
0
= No input detected
Response Status:
01 – highest number of inputs for your switcher
01 – highest number of outputs for your switcher
0 = no source connected
0 = No monitor connected
1 = Monitor connected but does not support HDCP
2 = Monitor connected, supports HDCP, but the video signal is not encrypted
7 = Monitor connected, supports HDCP, and the video signal is encrypted
0 = off
05 through 08 (10x8)
0 = no input connected
Additional Description
... X$ n ]
3
... X% n ] Includes mirrored outputs (such as 5A, 5B, 6A, 6B for 10x8) for a
3
total of two more
] Set the input as an HDCP-authorized device.
*1
] Set the input as not an HDCP-authorized device.
*0
Show HDCP-authorized device status.
X* n ] X*
3 ... Mulitple s; each is the signal status of an input, starting from
1. n is the highest number of inputs for your switcher.
1 = Sync detected
0 0 0 1 1 1 0 1 0 1
Input: 1 2 3 4 5 6 7 8 9 10
1 = source is HDCP compliant
1 = on (default)
3 through 6 (8x6)
1 = input connected
X%
s than the number of outputs (10 for 10x8).
2 = source is not HDCP compliant
3 and 4 (8x4) 1 and 2 (8x2)