Extron electronics DTP CrossPoint 4K Series Setup Manual page 3

FCC Class A Notice
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC rules. The Class A limits provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause interference. This interference
must be corrected at the expense of the user.
ATTENTION:
with unshielded twisted pair (UTP) or shielded twisted pair
(STP) cables; but, to ensure FCC Class A and CE compliance,
STP cables and STP Connectors are required..
For more information on safety guidelines, regulatory
compliances, EMI/EMF compatibility, accessibility, and related
topics, see the
Guide" on the Extron website.
Battery Notice
This product contains a battery. Do not open the unit to
replace the battery. If the battery needs replacing, return
the entire unit to Extron (for the correct address, see the Extron
Warranty section on the last page of this guide).
CAUTION:
an incorrect type. Dispose of used batteries according to the
instructions.
ATTENTION :
pile par le mauvais type de pile. Débarrassez-vous des piles
usagées selon le mode d'emploi.
The Twisted Pair Extension technology works
"Extron Safety and Regulatory Compliance
Risk of explosion. Do not replace the battery with
Risque d'explosion. Ne pas remplacer la