Extron electronics DTP CrossPoint 4K Series Setup Manual page 35

Command
Recall a preset
Recall a preset
View video and audio mutes
View output mutes
Example:
(DTP CrossPoint 108):
Lock (Executive) modes
NOTE: See
Setting the Front Panel Locks (Executive Modes)
Lock all front panel functions
Lock advanced front panel functions 2X
Unlock all front panel functions
View lock status
Information requests
Information request
Request part number
Query irmware version
Example:
NOTE:
X1#
= Preset
X1$
= Video and audio mute status
X1%
= Lock mode
X1^
= Firmware version number to second decimal place (x.xx)
SIS Command Response
(Host to Unit) (Unit to Host)
X1# X1#]
. Rpr
E VM } X1$ 1 X1$ 2
E VM } 022 ... 1
on page 20 for more information on the Lock modes.
1X Exe1 ]
]
Exe2
0X ]
Exe0
X X1%]
I
DTPCP108
N
60- nnnn - nn
Q X1^]
Q ]
1.23
01 through 32
0 = video unmuted
0 = lock mode 0 (unlocked)
Additional Description
Recall preset
... X1$ n ] X1$
Each response is the mute status of an output, starting
from output 1. Includes mirrored outputs (such as 3A, 3B, 4A,
4B for 8x6) for a total of two more
outputs (8 for 8x6).
Output 1 is unmuted. Audio is muted on outputs 2 and 3,
]
video is muted on output 8.
Enable Lock mode 1.
Enable Lock mode 2.
Enable Lock mode 0.
] One of several responses shown as an example.
] See the Extron website for part number.
The factory-installed switcher controller irmware version is
1.23 (sample value only).
1 = video mute
1 = lock mode 1
X1#
. Command character is period.
X%
s than the number of
=
2 video and sync mute
2 = lock mode 2 (default)