Canon LBP6670dn Series Service Manual page 124

5
Trouble Shooting > Error Codes > Error Code Details
E Detail Item
Code Code
E602 0009 Title MEAP cannot be started.
Detection description MEAP cannot be started due to an error caused by invalid power
down.
Remedy Select Function.gr > MEAP > MEAP FUNCTION = ON, and turn
OFF and then ON the main power.
* Since the installed MEAP application and its management
information are all cleared after reboot, MEAP needs to be
reinstalled.
E602 1102 Title File system could not be initialized normally (MEAP-related).
Detection description File system could not be initialized normally (MEAP-related).
Remedy Turning OFF and then ON the main power executes auto
recovery.
Since E616-0001 may be displayed in some cases, execute the
remedy for E616-0001.
* When this error occurs, the firmware downloaded by the CDS
Updator will be lost.
E602 1112 Title Device access error (MEAP-related).
Detection description Device access error (MEAP-related).
Remedy Turning OFF and then ON the main power executes auto
recovery.
Since E616-0001 may be displayed in some cases, execute the
remedy for E616-0001.
* When this error occurs, the firmware downloaded by the CDS
Updator will be lost.
E602 1113 Title Device access error (MEAP-related).
Detection description Device access error (MEAP-related).
Remedy Turning OFF and then ON the main power executes auto
recovery.
Since E616-0001 may be displayed in some cases, execute the
remedy for E616-0001.
* When this error occurs, the firmware downloaded by the CDS
Updator will be lost.
E602 1302 Title File system could not be initialized normally.
Detection description File system could not be initialized normally.
Remedy Turning OFF and then ON the main power executes auto
recovery.
* When this error occurs, the firmware downloaded by the CDS
Updator will be lost.
E602 1312 Title Device access error
Detection description Device access error
Remedy Turning OFF and then ON the main power executes auto
recovery.
* When this error occurs, the firmware downloaded by the CDS
Updator will be lost.
5 Trouble Shooting > Error Codes > Error Code Details
Description E Detail Item
Code Code
E602 1313 Title Device access error
Detection description Device access error
Remedy Turning OFF and then ON the main power executes auto
recovery.
* When this error occurs, the firmware downloaded by the CDS
Updator will be lost.
E602 1602 Title File system could not be initialized normally (CDS-related).
Detection description File system could not be initialized normally (CDS-related).
Remedy Turning OFF and then ON the main power executes auto
recovery.
* When this error occurs, the firmware downloaded by the CDS
Updator will be lost.
E602 1612 Title Device access error (CDS-related).
Detection description Device access error (CDS-related).
Remedy Turning OFF and then ON the main power executes auto
recovery.
* When this error occurs, the firmware downloaded by the CDS
Updator will be lost.
E602 1613 Title Device access error (CDS-related).
Detection description Device access error (CDS-related).
Remedy Turning OFF and then ON the main power executes auto
recovery.
* When this error occurs, the firmware downloaded by the CDS
Updator will be lost.
E604 0000 Title Lack of memory capacity
Detection description Lack of memory capacity
Remedy Check the memory capacity of ROM mounted on the Main
Controller.
E604 0001 Title Memory error
Detection description Failed to allocate the memory required to start PDL.
Remedy Check the installed memory, remove and then install the
memory, and replace the memory.
E616 0001 Title MEAP application is lost.
Detection description MEAP application is lost.
Remedy Select Function.gr > MEAP > MEAP FUNCTION = ON, and turn
OFF and then ON the main power.
* The setting is switched to the following after reboot.
Initial screen setting: Native
MEAP authentication: Off
USB-Host setting: Native
CDS-related: Off
E616 0002 Title System error
Detection description System error
Remedy Execute Setup > Initialize Panel Setting to initialize NVRAM.
5-5
Description
5-5