Canon LBP6670dn Series Service Manual page 147

5
Trouble Shooting > Updater > Overview > System Management Operations
● Displaying Logs
Update Logs
This section describes how to confirm System Option/MEAP Application Installation Logs and
Firmware Update Logs.
1. Select [Settings/Registration] > [License/Other] > [Register/Update Software] > [Display
Logs/Communication Test] from management mode of Remote UI.
Note:
You can also access from [Register/Updater Software (Management Settings)] > [Display
Logs/Communication Test]
2. Press [Update Logs] button.
5 Trouble Shooting > Updater > Overview > System Management Operations
3. Press [Switch] button.
4. System Option/MEAP Application Installation Logs and Firmware Update Logs are shown.
F-5-38
5-28
F-5-39
5-28