Canon LBP6670dn Series Service Manual page 46

2
Technology > MEAP > Login to SMS > Procedure to Log in
Note:
• The default password is "MeapSmsLogin." (The password is case-sensitive.)
• If you click the [Cancel] button on the initialization confirmation page, password
initialization is not performed and the login page appears.
● If login is not possible due to exclusive control
Because SMS uses exclusive control, if there is another user already logged in to the SMS of
the same device, then you cannot log in.
Exclusive control message example
If you cannot log in due to exclusive control, you need to ask the other user to log out before
you can try again.
Note:
If you close the browser without logging out, the session remains active. In this case,
you cannot log in again.
If this problem occurs, you can wait for 5 minutes so that the session is disconnected.
Or, you can restart the device to force the session to disconnect.
2 Technology > MEAP > Login to SMS > Procedure to Log in
● If [ Key and Certificate Settings ] is not set
If [ Key and Certificate Settings ] is not set correctly, you cannot access the URL for SMS
(https://<devices's IP address>:8443/sms/). In this case, you can use the following procedure
to solve the problem.
1. Go to http://<device's IP address>:8000/sms/, and check to see that "HTTP 500 Internal
Server Error" appears.
2. If the message is displayed, see the procedure described in "Key Pair and Server
Certificate when Using Encrypted SSL Communication" in this manual to deal with the
problem.
Note:
As for SMS, by setting the key to be used, encrypted SSL communication is always
executed regardless of the following setting: (Settings/Registration) > [Management
Settings] > [License/Other] > [MEAP Settings] > [Use SSL] > ON/OFF.
● How to deal with a message "Certificate Error" appearing during
access
If "Certificate Error" appears when you access SMS from a browser, refer to the procedure
described in " Installing a server certificate (reference information) " in this manual to deal
with the problem.
F-2-57
2-30
2-30