3.
The large threaded cable gland (M20 x 1.5) is
only for use with the coaxial cable.
Punch out as many threaded holes on the bottom side of the
rear part as required
Fig. 14
1. Threaded cable gland
2. Reducing insert
3. Clamping nut
4. Terminal diagram
4.
Screw the corresponding threaded cable glands (1) in and
tighten
5.
Insert the reducing inserts (2) in the threaded cable glands
according to the cable cross section used
6.
Guide the cables into the threaded cable glands
Assembly and installation
A0497
A0272
29