Procedure With Dxm Housing (Small); Mounting (Mechanical) - ProMinent DULCOMARIN II Assembly And Installation Manual

5.2 Procedure with DXM housing (small)

5.2.1 Mounting (mechanical)

For wall mounting, please observe the
following steps:
6. Check the cabling using the wiring diagram
Mounting materials (contained in the scope of delivery):
1 x wall/pipe bracket
n
2 x half-round head screws 5x45 mm
n
2 x washers 5.3
n
2 x rawl plug Ø 8 mm, plastic
n
1 x sealing cap
n
1 x safety screw (PT)
n
2
1
1. Remove the wall/pipe bracket from the DXM
2. Pull the two snap hooks outwards and push them upwards
(1)
3. Fold the wall/pipe bracket away and pull it out (2) in a down‐
wards direction
4. Mark two drill holes diagonal to each other by using the wall/
pipe bracket as a drilling template
5. Drill the holes: Ø 8 mm, d = 50 mm
Assembly and installation
A0273
27