ProMinent DULCOMARIN II Assembly And Installation Manual page 20

5.
4.
3.
2.
Fig. 11: Fitting the threaded cable glands
1. Blanking plug
2. Union nut
3. Multiple seal insert
4. Threaded cable gland
5. Lock nut
4. Screw in the appropriate threaded cable glands (4) using
suitable lock nuts (5) and tighten firmly
5. Insert multiple seal inserts (3) depending on the cable diam‐
eter being used
6. Guide the cables into the threaded cable glands
7.
Further steps are contained in
coaxial cable' on page 26 and Ä Chapter 5.1.5 'Connecting
the terminals' on page 26 .
8. Tighten the union nuts (2) of the threaded cable glands so
that they are properly sealed
9. Place the front part on the rear part
10. Manually tighten the four housing screws
11.
CAUTION!
Protection class IP 54
Once again check the seating of the seal. Pro‐
tection class IP 54 is only achieved if the control
panel mounting is correct.
Assembly and installation
1.
A0495
Ä Chapter 5.1.4 'Connect the
25