Assembly and installation
5
Assembly and installation
5.1 Procedure with DXC housing (large)
5.1.1 Wall mounting
Wall mounting
20
The DXC housing is suitable for mounting on a wall or in a control
panel
Mounting materials (contained in the scope of delivery)
1 x wall bracket
n
4 x PT screws 5 x 35 mm
n
4 x washers 5.3
n
4 x rawl plug Ø 8 mm, plastic
n
Take the wall bracket out of the DXC housing
Fig. 6: Removing the wall bracket
1.
Pull the two snap hooks (1) outwards
ð The wall brackets snaps slightly downwards.
2.
Push the wall bracket downwards (2) from the DXC housing
and fold (3) it out
3.
Use the wall bracket as a drilling template to mark the posi‐
tions of four drill holes
4.
Drill the holes: Ø 8 mm, d = 50 mm
A0490