Table of Contents
Advertisement
Setting the printer emulations and software options
Printer emulations determine what commands are available to the printer. To change the printer emulations settings,
select the "Emulations/Software Options" sub-menu of the main menu and answer "Yes" to "Set the Printer Emulations?"
printed on the receipt. This takes you to the instructions for setting the printer emulation.
CAUTION
Be extremely careful changing any of the printer
settings to avoid possibility of changing other settings
that might affect the performance of the printer.
Press the paper feed button as instructed to select the
printer emulation you want.
•
Printer Emulation
A776II native mode
A756 emulation
•
Printer ID mode
This function determines the ID value returned
by the printer in response to a Transmit printer ID
command (1D 49 n). The printer can be configured
to send back the ID of the B780 or A721.
Receipt Options
•
Default lines per inch
This function allows you to set the receipt default
for lines per inch to any of the following:
8.13 lines per inch
7.52 lines per inch
6.77 lines per inch
6.00 lines per inch
Slip Options
•
Slip eject at receipt select
When enabled the printer ejects the slip when
receipt is selected.
•
Delete Lead Spaces: N Standard Columns
Sets the A776II to delete number (N) of leading
spaces in the slip format for standard print.
•
Delete Lead Spaces: N Compressed Columns
Sets the A776II to delete number (N) of leading
spaces in the slip format for compressed print.
•
Compressed Mode: Disabled/Enabled
Turns on compressed print for all slip printing
•
Delete Trailing Spaces: Disabled/Enabled
Removes all trailing spaces for slip printing.
A776 2UG0001 B 11/2016
Chapter 3: Settng up the Printer
•
Carriage return usage
This function allows the printer to use the carriage
return (hexadecimal 0D) command as a print
command or to ignore it, depending on the
application.
Note
The A756 emulation does not recognize the ColorPOS
commands.
Note
Press the paper feed button for at least one second to
validate the selection.
•
Default font
Sets the default receipt font for monochrome, two-
color, and user-defined fonts.
•
Font size
Allows user to set font size for the emulation being
used.
•
Max Lines Rotated: N lines
Varies the spacing between the rotated print
formats to allow printing of more lines. The
setting (N) is changeable from 21 to 25 lines.
•
A760 Slip Stop: Disabled/Enabled
Causes the slip form to be printed at the same
spot as in the A758 or A760 printer.
A776II Two-Color Thermal/Impact Hybrid Printer: User Guide
21
®
Advertisement
Table of Contents
