Table of Contents
Advertisement
MICR Reader
Character sets/fonts
Check Read Rate
Parsing Formats
Physical A776II Base Unit
Dimensions (W x D x H)
Weight
Power Requirements
Software and Firmware Capability
Emulations Available
Data Buffer
User Memory
Communication
Printer Drivers
Thermal Paper Requirements:
Paper Type
Paper Roll (W x Dia.)
Impact Slip Forms Requirements:
Size
Maximum Length
Number of Plies
Paper Thickness
Miscellaneous:
Energy-Savings
Printer reliability
A776 2UG0001 B 11/2016
E-13B and CMC-7, auto discriminate (Integrated in slip station)
99% minimum
E-13B only. Programmable to any format
6.5 in. x 11.4 in. x 6.6 in. (165.10 mm x 289.56 mm x 167.64 mm)
Approximately 8 pounds
24 VDC, 2.5 Amps
Application Compatible Escape Commands (ACEC), CognitiveTPG A756,
ColorPOS
, Receiptware ready
®
8K
8
MB:
shared for graphics, logos, user defined characters, user data storage, and
electronic journal
Board Architecture supports:
Dual 9-Pin RS232/USB, 25-pin RS232, Ethernet, Powered USB
OPOS for Windows, Java POS for Windows & Linux, Windows Mini Drivers for
Windows.
Direct Thermal, POS Grade(s), special requirements for color printing (see Ch 6)
3.15 in. x 3.27 in. (80 mm x 83 mm)
2.75 in. x 5.00 in. (69.85 mm x 127.00 mm) minimum front & side
11.00 in. (279.4 mm)
1 - 4 ply multipart
0.014 in. maximum (0.35 mm)
Option to configure printer to enter low-power (1 watt) idle state if no data is
received after user-specified number of minutes.
Thermal Print Mechanism; 242 KM paper (72 M lines) monochrome and two-color
(64.5 M lines),
Auto Knife Cutter; 2 M cuts
Impact Print Mechanism; 15 M lines
Impact Print head : 200 M characters
Magnetic Ink Character Recognition (MICR) reader: 200,000 Reads
A776II Two-Color Thermal/Impact Hybrid Printer: User Guide
Chapter 2: About the Printer and Imaging
5
Advertisement
Table of Contents
