Storage; Transport; Pre-Installation Requirements - KROHNE OPTIWAVE 5200 C Quick Start-Up

INSTALLATION
2

2.4 Storage

WARNING!
Do not keep the device in a vertical position. This will damage the antenna and the device will not
measure correctly.
Figure 2-4: Storage conditions
1 When you put the device into storage, do not keep it in a vertical position
2 Put the device on its side. We recommend that you use the packaging in which it was delivered.
3 Storage temperature range: -40...+80°C / -40...+176°F
• Store the device in a dry and dust-free location.
• Store the device in its original packing.

2.5 Transport

WARNING!
Depending on the version, the device will weight approx. 5...30 kg / 11...66 lbs. To carry, use
•
both hands to lift the device carefully by the converter housing. If necessary, lift the device
with a hoist.
When handling the device, avoid hard blows, jolts, impact, etc. to prevent damage.
•

2.6 Pre-installation requirements

INFORMATION!
Obey the precautions that follow to make sure that the device is correctly installed.
• Make sure that there is sufficent space on all sides.
• Protect the signal converter from direct sunlight. The device has a weather protection option.
• Do not subject the signal converter to heavy vibrations.
6 www.krohne.com
OPTIWAVE 5200 C/F
08/2013 - 4001905202 - QS OPTIWAVE 5200 R02 en