Connections To Operating Device - Honeywell Excel 100C Installation Instructions Manual

EXCEL 100C INSTALLATION INSTRUCTIONS

Connections to Operating Device

Wiring to XI582 Operator's Unit
to XC100C
(front)
to XL100C
(rear)
EXCEL 100C
XW582
XW583
The XI582 operator's unit can be connected to either the front connector (using the XW582 cable) or the rear terminals (using
the XW583 cable) of the Excel 100C.
XW582 cable, length 15 ft (5 m)
XW583 cable, length 15 ft (5 m)
NOTE: The controller will warm-start if the 5 V supply for the XI582 is shorted.
EN1R-0144GE51 R1007
SHIELD to XI582
XW582
SHIELD to XI582
XW583
XI582
XI582
24