Required Third-Party Equipment - Honeywell Excel 100C Installation Instructions Manual

Required Third-Party Equipment

The Siemens M20 Terminal (shown below) is required for GSM communication. In
addition, a 3 V Mini SIM card with personal identification number (PIN) is required
for the M20T. The Mini SIM card, supplied by the GSM Network Provider, must be
released for data communication at 9600 baud.
A separate telephone number is required for data communication with the same SIM
card (one telephone number for voice communications and one for data).
HANDSET INTERFACE
V.24 INTERFACE
SUB-D SOCKET
Mechanical characteristics:
Weight
Dimensions (max.) LxWxH
Temperature range
Protection-class
Mechanical vibrations
Max. pulse-acceleration
Air humidity
Electrical characteristics:
Operating voltage range
Undervoltage/overvoltage
protection:
Power consumption at 12V
Max. line-in/out cable length
Protection fuse
Max. RF power
Power supply connector
CE conformity:
• 89/336/EC (EMC guideline)
• 73/23/EC (Low-voltage guideline)
• 91/263/EC (Telecommunications devices guideline)
Standards:
• EMC: ETS 300 342-1
• Safety: EN 60950
• GSM network: TBR 19, TBR 20
35
EXCEL 100C INSTALLATION INSTRUCTIONS
MOUNTING HOLES
TOP
BOTTOM
OPERATING
STATUS LED
FME ANTENNA
POWER SUPPLY
CONNECTOR
AND AUDIO
INTERFACE
145 g
107.0 x 63.5 x 31.3 mm
-20°C to 55°C
IP40
Amplitude 7.5 mm at 5 to 200 Hz sine
30 g pulse with 18 ms duration
5–98%
8 to 28.8 Vdc, +/- 5% ripple
0 V / 45 V
<200 mA speech mode, <14 mA idle mode
2 m (e.g. modified NOKIA 2110 for M20T)
1 A, fast blow
2 W at 900 MHz
6-pin modular
EN1R-0144GE51 R1007