Table 5-4 Set Up Wiring Procedure For Thermocouple Inputs Using Thermocouple Source; Table 5-5 Set Up Wiring Procedure For Rtd Inputs; Figure 5-3 Wiring Connections For Thermocouple Inputs Using Thermocouple Source; Figure 5-4 Wiring Connections For Rtd (Resistance Thermometer Device) - Honeywell UDC2500 Product Manual

Thermocouple Inputs Using a Thermocouple Source
Refer to Figure 5-3 and wire the controller according to the procedure given in Table
5-4..
Table 5-4 Set Up Wiring Procedure for Thermocouple Inputs using
Step
1 Connect the thermocouple extension wires to the terminals for Input #1 as shown in
Figure 5-3.
Figure 5-3 Wiring Connections for Thermocouple Inputs Using
RTD Inputs
Refer to Figure 5-4 and wire the controller according to the procedure given in Table 5-5.
Step
1 Connect the copper leads from the calibrator to the Input #1 terminals as shown in
Figure 5-4.

Figure 5-4 Wiring Connections for RTD (Resistance Thermometer Device)

Thermocouple Source
+
Thermocouple
_
Source
Thermocouple
Extension Wire
Thermocouple Source

Table 5-5 Set Up Wiring Procedure for RTD Inputs

Decade
Resistance
Box
UDC2500 Universal Digital Limit ControllerProduct Manual
Action
+
26
_
27
Action
25R
26+
27-
Copper Leads
Equal Length
Input Calibration
63