To Power A Terminal And Charge Its Main Battery - Honeywell Dolphin 75e User Manual

Preliminary Draft, Not for Release - Please Review 2-3-2015

To Power a Terminal and Charge its Main Battery

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage
not covered by the warranty.
1. Install the main battery in the terminal; see
2. Mount the Mobile base and install the power cable; see
3. Pull the spring latch back and insert the Dolphin 75e into the terminal well. Charging begins immediately if required by
the Dolphin terminal.
Note: Align the contacts on the back panel of the terminal with the charging contacts on the Mobile Base.
Install the Battery on page 2-1.
Mounting the Mobile Base on page 11-3.
11 - 5