Bottom Panel - Honeywell Dolphin 75e User Manual

Preliminary Draft, Not for Release - Please Review 2-3-2015
1. Touch All Apps
2. Input the Proxy host name and Proxy port. If required, designate when to bypass the proxy.
3. Select Done.
Displaying the Net Base and Terminal IP Address
Once the Dolphin terminal has been successfully connected to the network through Net Base, the terminal uses the
Net Base IP address. The IP address can be used by any application on the Dolphin terminal.
Touch All Apps
Mounting the Net Base
Set the Net Base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough
workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the Net Base. When choosing a
location, bear in mind that the mounting location must allow users to see the LEDs and provide easy access to the terminal
wells, the Ethernet ports, and the power jack.

Bottom Panel

DIN Rail Slot
Optional DIN Rail Mount
A DIN rail (7.5 X 35 mm) may be installed on the bottom of the base to provide the optional security of mounting the base to
a flat horizontal surface with hardware.
Additional Hardware
• DIN Rail, Qty. 1
• 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4
• 3/16 in. dia nut, Qty. 2
Note: The items listed above are for reference only. Final hardware selection is dependent on the material type and
thickness of the mounting surface.
13 - 6
> Settings > Ethernet proxy settings.
> Settings > About Phone > Status to view the assigned IP Address.
Rubber Feet, Qty. 6