Feature Descriptions: Back, Top, And Left Panels - Honeywell Dolphin 75e User Manual

Hide thumbs Also See for Dolphin 75e:
Table of Contents

Advertisement

Preliminary Draft, Not for Release - Please Review 2-3-2015

Feature Descriptions: Back, Top, and Left Panels

Audio Jack
The audio jack is located under the protective door on the top of the terminal. To access the jack gently lift the edge of the
door marked with an arrow. The 3.5mm audio jack supports both speaker (stereo) and microphone (mono) headsets.
Battery
The 3.7V Li-ion rechargeable battery provides the main power for the terminal and is protected by the battery door. See
Battery
on page 3-8 for battery specifications, replacement part numbers, and guidelines for use and disposal.
Battery Door
The battery door protects the battery and any installed SIM and/or memory cards in the terminal's battery well. Proper
installation of the battery door preserves the environmental rating of the terminal. Do not use the terminal without the
battery door installed.
Battery Door Lock
The battery door lock secures the battery door to the terminal. Slide the lock down toward the IO contacts to release the
lock for battery door removal and battery access. Slide the lock up toward the camera lens to secure the battery door
closed and seal the battery in the terminal. Proper installation of the battery door preserves the environmental rating of the
terminal.
Battery Latch
The battery latch secures the battery in the battery well. Pull the latch away from the battery to release and remove the
battery from the terminal. For information on
Color Camera
The 8.0-Megapixel Resolution color camera provides easy picture and video capture. The camera lens and camera flash
are located on the back panel of the terminal.
Camera Flash
The camera flash is located on the back panel of the terminal. When used as a Camera Flash with the integrated color
camera, the flash is controlled by the camera application.
Image Engine Window
The image engine reads and decodes linear, stacked linear (e.g., PDF417), and 2D matrix bar code symbologies. The LED
aperture for the imaging engine's LED aimer is contained behind this window. For more details, see
Engine
on page
4-1.
Left Scan/Image Button
By default, the left button triggers the scanner/imager. You can reassign the button to launch applications or execute
commands; see
Hotkeys
on page
Memory Card Socket
The memory card socket provides the user with the option to expand the terminal's memory capacity using microSD or
microSDHC memory interfaces. The expansion socket is located under the battery door and battery.
When the battery door and battery pack are properly installed, the card is sealed against moisture and particle intrusion,
read/write data is stored securely, and the terminal's environmental rating is preserved; see
page
3-12.
Memory Retention Flap
The memory card retention flap locks the memory card in the socket; see
Replacing the
Battery, see page 2-10.
2-9.
Using the Scan Image
Installing a Memory Card
Installing a Memory Card
on page
on
3-12.
3 - 7

Advertisement

Table of Contents
loading

Table of Contents