Chapter 10 - Dolphin 70E Black Ebase (Model 70E-Ehb); Overview; Unpacking The Ebase; Optional Equipment - Honeywell Dolphin 75e User Manual

Preliminary Draft, Not for Release - Please Review 2-3-2015
10
Dolphin 70e Black eBase (Model 70e-EHB)

Overview

The Ethernet Base (eBase) enables a single Dolphin 75e computer to communicate with a host device over an Ethernet
network.
The 70e-EHB charger is designed for use with the following Dolphin models and batteries, manufactured for Honeywell
International Inc:
Dolphin Model
Dolphin 75e
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Unpacking the eBase

Open the shipping box and inspect the package to see that the following standard items are included:
• One Dolphin eBase Ethernet cradle, model 70e-EHB
• One power supply (see
• One power cord
These items are needed to set up and operate the eBase. If any items are missing or anything appears to be damaged, contact
your Customer Account Representative. Keep the original packaging in case you need to return the eBase for service or to store
the eBase while not in use.

Optional Equipment

• A standard USB (Type A to B) cable is required when using the eBase for USB communication between the terminal and
a host device.
• A standard CAT-5 Ethernet network cable is required when using the eBase for communication between the terminal and
a host device over an Ethernet network.

Charging Overview

The base provides power to the intelligent battery charging system in all Dolphin terminals that senses when a full charge has
been achieved and switches to a trickle charge to maintain the full charge. The base completes a full charge of the main battery
pack installed in the terminal seated in the terminal well in 4 hours for the standard battery or 6 hours for the extended battery.
The base completes a full charge of the battery pack in the
battery or 6 hours for the extended battery.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the
Use and Disposal
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
not covered by the warranty.

Convenient Storage

The intelligent battery charging system makes this base a safe and convenient storage receptacle for your Dolphin terminal.
Battery Model No. Battery Part No.
70e-BTSC BAT-STANDARD-02
70e-BTEC BAT-EXTENDED-02
Power on page 10-5)
on page 3-11.
Battery Specification
Li-ion 3.7V, 6.179 watt hour
Li-ion 3.7V, 12.358 watt hour
Auxiliary Battery Well (see page 10-3) in 4 hours for the standard
Guidelines for Battery Pack
10 - 1