Automatic Scanning; Continuous Scanning - Honeywell Dolphin 75e User Manual

Preliminary Draft, Not for Release - Please Review 2-3-2015
4. The bar code is decoded and the results appear on the screen.
Decode Results
Touch the dots or swipe left or
right to scroll through the
decode results of past scans.

Automatic Scanning

Enable Automatic scanning mode to activate the imager for continuous scanning without requiring the operator to touch
Scan for each bar code presented in the field of view of the imager. To configure the time interval between scan attempts,
see Auto Scan Delay under
1. Slide the Automatic blue button to the ON position to enable the feature.
2. Touch Scan or press the Scan button to activate the imaging engine. Once activated, the imager automatically scans
and decodes bar codes presented in the field of view.
3. Touch Scan or press the Scan button to deactivate the imager.
4. Slide the Automatic blue button to the OFF position to disable the feature.

Continuous Scanning

Enable Continuous scanning mode to activate the imager for continuous scanning only when the operator touches and
holds Scan or presses and holds the Scan button. The time interval between scan attempts is minimal and not
configurable.
1. Slide the Continuous blue button to the ON position to enable the feature.
2. Touch and hold Scan or press and hold the Scan button to activate the imaging engine.
The imager scans and decodes bar codes presented in the terminal's field of view as long as Scan or the Scan button is
pressed.
3. Release Scan or the Scan button to deactivate the imager.
4. Slide the Continuous blue button to the OFF position to disable the feature.
Configuring the Scan Demo Application
Scan Statistics
See Configuring the Scan Demo
Application
(page 4-4).
on page 4-4.
4 - 3