Back Panel; Bottom Panel; Power - Honeywell Dolphin 75e User Manual

Preliminary Draft, Not for Release - Please Review 2-3-2015

Back Panel

Auxiliary Battery Well
USB Port
Auxiliary Battery Well
The base enables you to charge an additional battery pack independently of the terminal well in 4 hours for the standard
battery or 6 hours for the extended battery. This feature ensures that you can always have a fully-charged battery for your
terminal. See "Charging a Spare Battery in the Auxiliary Battery Well" on page 9-5
USB Port
This USB port is USB v2.0 Hi-Speed (480 Mbps) compliant. Using a USB cable, you can connect the base to a host device,
such as a workstation. When the terminal is seated in the terminal well, it is connected to the host device via the base. See
Communication on page 9-6.
DC Power Jack
See

Power

on page 9-4.

Bottom Panel

For details on how to mount the HomeBase, see
Compliance Label
Power
The base requires 12 Volts DC input for communications, battery charging, and power output to the terminal. The power adapter
included with the base, converts the voltage from the AC power source to 12 Volts DC. Use only a UL listed power supply,
which has been qualified by Honeywell with output rated at 12VDC and 3 amps with the device. The operating
temperature range is -10° to 50°C (14° to 122°F). Honeywell recommends that you leave the base connected to its power
source at all times, so that it is always ready to use.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
9 - 4
DC Power Jack
Mounting the HomeBase on page 9-6.
Serial Number Label