Mobile Base Components; Adjustable Arm With Suction Cup Base For Windshield Mounting - Honeywell Dolphin 75e User Manual

Preliminary Draft, Not for Release - Please Review 2-3-2015

Mobile Base Components

Power Adapter

Adjustable Arm with Suction Cup Base for Windshield Mounting

The Mobile Base includes a two point adjustable arm with a suction cup base for fixed mount locations (e.g., a car windshield).
Power Adapter
The mobile base is provided with a power adapter cable that can be connected to a vehicle cigarette lighter outlet.
UL listed power supply
Input: 10V - 30VDC, 0.43A(30V) - 1.28A(10V)
Output: 4.75V - 5.25VDC, 0 - 2A
Verify that the power source is always within the specified range and observe correct input voltage polarity. An
improper input voltage range or reverse polarity could damage the power conversion circuitry.
Speaker and Volume Control Dial
The integrated speaker amplifies the Dolphin terminal's audio signals and the speaker volume is adjusted using the dial
located on the side of the base.
Spring Latch
The spring latch secures the terminal in the Mobile Base charging well.
Terminal Charging Well
Place the terminal in this well to charge the battery.
11 - 2
Speaker
Power Jack
Speaker Volume Control
Mounting Lever
Suction Cup Base
Terminal Charging Well
Spring Latch
Two point Adjustable
Arm