Back Panel - Honeywell Dolphin 75e User Manual

Preliminary Draft, Not for Release - Please Review 2-3-2015
COMM LED
Indicates the status of the connection and data transfer between the Dolphin terminal and the host device.
This color
Green
Note: Ethernet activity is indicated by RJ45 integrated LED on the back panel of the base.

Back Panel

Yellow LED
RJ45 Ethernet Port
Auxiliary Battery Well
The eBase enables you to charge an additional battery pack independently of the terminal well in 4 hours for the standard
battery or 6 hours for the extended battery. This feature ensures that you can always have a fully charged battery for your
terminal.
USB Port
This USB port is USB v2.0 Hi-Speed (480 Mbps) compliant. Using a USB cable, you can connect the base to a host device,
such as a workstation (PC). When the terminal is seated in the terminal well, it is connected to the host device via the base.
RJ45 Ethernet Port
Use a standard CAT-5 Ethernet cable; you can connect the ebase to an Ethernet-compliant device to facilitate Ethernet
communication to and from the terminal. The RJ45 connector includes integrated LEDs that provide Ethernet
communication status and speed information.
Status
No Ethernet Link
10Mbps Ethernet Connection Established
100Mbps Ethernet Connection Established
Data transfer in progress
DC Power Jack
See Power.
10 - 4
means...
A USB Connection is established with the host workstation.
Green LED
USB Port
Auxiliary Battery Well
DC Power Jack
Yellow LED
Off
Off
On
Connection Speed Dependent
(see above)
Green LED
Off
On
On
Flashing