Hotkeys; Virtual Keyboard; Using The Virtual Keyboard; Turning Power On/Off - Honeywell Dolphin 75e User Manual

Hide thumbs Also See for Dolphin 75e:
Table of Contents

Advertisement

Preliminary Draft, Not for Release - Please Review 2-3-2015
Button
Back
Volume

Hotkeys

You can configure the Scan button and the Left and Right side buttons of the terminal to launch specific applications.
Touch All Apps
> Power Tools
Select the app you want assigned to the key from the associated menu.
Refer to
Features of the Dolphin 75e

Virtual Keyboard

The virtual keyboard appears when you open an application or select a field that requires text or numerical input. The content of
the keyboard may vary depending on the application in use and the input field requirements.

Using the Virtual Keyboard

During text input, you may need to switch between keyboard modes to access additional character sets (e.g., function keys,
symbols, and numbers). Each keyboard mode, includes navigation keys, which allow you to quickly switch between modes.
Touch the ABC key to switch to the Qwerty Mode, the ?123 key to switch to the Numeric Mode. Touch and hold the comma
"," key to access the settings for input options or the period "." key to access additional symbols (e.g., @, %, +, &).
See
Language & input
Note: The content of the keyboard and the mode initially displayed may vary depending on the application in use and the
input field requirements.

Turning Power On/Off

To turn the terminal On, press and release the Power button
To turn the terminal Off:
1. Press and hold the Power button
Note: If the Show System Dialog setting is turned off (see page 6-1), the Options menu does not display when you press
and hold the Power button. The terminal automatically reboots when Power button is held for approximately 8
seconds.
2. Touch Power Off.
You should always power off the terminal before removing the battery. For information on removing the battery, see
the
Battery.

Suspend Mode

Suspend mode automatically turns the touch screen off and locks the terminal to save battery power when the terminal is
inactive for a programmed period of time.
1. Press and release the Power button
Note: If the Power key setting has been turned off (disabled), pressing and releasing the key has no effect. See
Settings
on page 6-1.
Function
Back to the previous screen.
Raises or lowers the volume of the active speaker.
> Configure Hotkeys
on page 3-3 for button locations on the terminal.
on page 6-6 for additional information on configuring keyboard & input methods.
until the Options menu displays.
to toggle the terminal in or out of Suspend mode.
. Touch the box next to the key being configured.
.
Replacing
Display
2 - 9

Advertisement

Table of Contents
loading

Table of Contents