ACME XA-500 User Manual page 8

to select Disable, Near, Medium or Far, press the ENTER button to store. Press the MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
BL.O. P/T Moving —Blackout while pan/tilt moving
To select BL.O. P/T Moving, press the ENTER button to confirm. Use the UP/DOWN button to
select No (normal while pan/tilt moving) or Yes (blackout while pan/tilt moving), press the
ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
BL.O. Color Change — Blackout while change color
To select BL.O. Color Change, press the ENTER button to confirm. Use UP/DOWN button to
select No (normal while changing color) or Yes (blackout while change color), press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute
to exit menu mode.
BL.O. Gobo Change — Blackout while change gobo
To select BL.O. Gobo Change, press the ENTER button to confirm. Use the UP/DOWN button
to select No (normal while changing gobo) or Yes (blackout while changing gobo), press the
ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Dimmer Curve
To select Dimmer Curve, press the ENTER button to confirm. Use the DOWN/UP button to
select the Square, Inv SQ Law, Linear or S Curve. Once the mode has been selected, press the
ENTER button to setup, to go back to the functions without any change press the MENU
button again. Press and hold the MENU button about one second or wait for one minute to
exit the menu mode.
Optically Linear:
7A