Address Setting; Dmx 512 Configuration - ACME XA-500 User Manual

4.2 Address Setting

If you use a universal DMX controller to control the units, you have to set DMX address from 1 to
512 so that the units can receive DMX signal.
Press the MENU button to enter menu mode, select the DMX Functions, press the ENTER button
to confirm, use the UP and DOWN button to select the DMX Address, press the ENTER button to
confirm, the present address will blink on the display, use the UP and DOWN button to adjust the
address from 0 to 512, press the ENTER button to store. Press the MENU button back to the last
menu or let the unit idle 7 seconds to exit menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units：
Channel mode
29 Channels
31 Channels

4.3 DMX 512 Configuration

29 Channels Mode (Mode 1):
CHANNEL
1
2
3
4
5
6
7
8
Unit 1 Unit 2
Address Address
1
1
VALUE
Pan
000-255 0%  100%
Tilt
000-255 0%  100%
Pan/Tilt Speed
000-255 Fast  Slow
Cyan
000-255 0%  100%
Magenta
000-255 0%  100%
Yellow
000-255 0%  100%
CTO
000-255 0%  100%
Color
Unit 3
Address
30 59
32 63
FUNCTION
13A
Unit 4
Address
88
94