Advertisement
August 2017
2.1
Install transmitter
See appropriate transmitter reference manual for sensor-transmitter
installation. Refer to
Figure 7. Sensor Lead Wire Termination
Single element 3-wire
2.2
Commission transmitter
See appropriate transmitter reference manual for transmitter commissioning
instructions.
3.0
Installing optional accessories
3.1
Corrosion protection inlay
The corrosion protection inlay provides a layer of protection to help minimize
the possibility of dissimilar metal corrosion between the pipe clamp and pipe.
The inlay is installed in between the pipe clamp and the pipe. Ensure the sensor
is clearing the hole in the protection inlay after installation. Refer to
more information.
Figure 7
for sensor lead wire terminations.
Single element 4-wire
Quick Start Guide
Dual element 3-wire
Figure 8
for
7
Advertisement
