Table of Contents
Advertisement
Reference Manual
00809-0100-4311
5.3
Troubleshoot
Emerson did not design sensors or transmitters to be repaired in the field. If problems
should develop, first check for faulty wiring, confirm proper voltage to sensor, and
attempt a calibration.
If problems persist, please contact the Flame and Gas Detection Customer Care team first
by phone to try and resolve any issues. If issues cannot be resolved, please follow the
procedure in
5.4
Storage
Store the sensor and its electronic components/parts in locations free from dust, liquid
spills, contaminants, and moisture.
Make sure the storage temperature is well within the limits of the certified temperatures
of the equipment. See
5.5
Spare parts and accessories
Table 5-3: Available Spare Parts
Description
Calibration cup/splash guard
Calibration kit
Calibration gas
Ingress protection filter
Separation kit
Replacement sensor module
Note
The Net Safety SC311 is not certified for performance when the calibration cup, ingress
protection filter, or dust guard is attached.
Net Safety SC311
Return of
material.
Specifications
for certified temperatures.
™
Net Safety
Part Number
CCS-1
CAL-KIT-1
CAL-CYL-AIR (103 L air)
CAL-CYL-BUT (103 L butane)
CAL-CYL-ETH-A-50 (103 L ethylene)
CAL-CYL-HYD (103 L hydrogen)
CAL-CYL-METH (103 L methane)
CAL-CYL-PENT (103 L pentane)
CAL-CYL-PRO (103 L propane)
IPF-001
JB-MPD-A: aluminum
JB-MPD-S: 316 stainless steel
SC311-100
Maintenance
May 2019
25
Advertisement
Table of Contents
