Resetting The Parameters - Nidek Medical ARK-500A Operator's Manual

OPERATING PROCEDURES: Parameter Settings
To change the page of parameter:
6
Repeat Steps 4 to 5 to change the desired parameter settings.
7
To finish setting the parameters, press the exit button
The set parameter settings are saved even after power-off.
The screen returns to the AR measurement screen.

Resetting the parameters

To reset the parameters to the factory settings, follow the steps below.
1) Turn off the device.
2) Turn on the power switch while holding down the third function button from the top on the
3) The parameters are reset to the factory settings and the device is turned on.
62
Page up button
Page down button
• The parameter settings are maintained in memory even though the device is turned off.
• After changing parameter settings, turn off the device after pressing the exit button
Otherwise, parameter settings are not saved.
• Comments, date and time are not reset.
right of the LCD.
Displays the previous page.
Displays the next page.
.
.