Select The Best Location; Window Requirements - Panasonic CW-XC81YK Operating Instructions Manual

Table of Contents

Advertisement

SELECT THE BEST LOCATION

(Single or Double hung window)
CHOISIR LE MEILLEUR EMPLACEMENT
(Fenêtre à guillotine simple ou double)
Window
Fenêtre
SIDE VIEW
VUE LATÉRALE
Front grille
Grillage frontal

WINDOW REQUIREMENTS

CARACTÉRISTIQUES DE LA FENÊTRE
• Hot sun rays hitting the outside surface of the cabinet will create considerable heat
load. If the outside of the cabinet is exposed to direct sunlight, consider building an
awning to shade the cabinet while providing ample area for the heated air to be
exhausted from the condenser (both sides) and the top.
This unit is designed for installation in standard double hung windows. However, it
may also be installed in a sliding window using the optional installation kit (ME-68S
and CZ-MW4-P) available through your local dealer or parts distributor.
NOTE: The unit may also be installed "through the wall". You should, however,
observe standard carpentry practices and frame the opening without violating
local ordinances.
• Les rayons de soleil frappant la surface extérieure du boîtier sont un apport impor-
tant de chaleur. Si l'extérieur du boîtier est en plein soleil, vous pouvez fabriquer un
auvent pour le protéger tout en laissant suffisamment de place pour que l'air chauffé
puisse sortir du condensateur (des deux côtés) et par le dessus.
Ce climatiseur est conçu pour être installé sur des fenêtres standard à double
guillotine. Cependant, il peut être installé dans une fenêtre glissante employant le kit
d'installation optionnel (ME-68S et CZ-MW4-P) disponible par votre revendeur local
ou le distributeur de pièces.
NOTE: Il est aussi possible d'installer l'appareil "à travers le mur''. Vous devez cependant
respecter les règles courantes de menuiserie et obtenir une ouverture sans
avoir à violer les pratiques locales.
PREPARATION OF AIR CONDITIONER CHASSIS
PRÉPARATION DU CHÂSSIS DU CLIMATISEUR
1
Remove the front intake grille
Retirez la grille avant d'entrée d'air
Lift up to about
90° and remove.
Levez le couvercle
à environ 90° et
retirez.
Slide the front intake grille slightly to the left to unhook
the tabs.
Faites glisser légèrement la grille avant d'entrée d'air
vers la gauche pour décrocher les attaches.
11
18–
/
inches
16
18–
11
/
pouces
16
12 inches
12 pouces
More than 4 inches
Plus de 4 pouces
Push and release.
Poussez et déclenchez.
Indoor side
Côté intérieur
Window
Fenêtre
Front grille
Grillage frontal
2
Remove the air filter
Retirez le filtre à air
Air filter
Filtre à air
Tilt up and pull out the air filter by the holder.
Inclinez et retirez le filtre à air par le support.
NOTE: It is much easier, and also safer, to install the
empty cabinet into a window first and we
suggest that you follow this procedure.
NOTE: Il est beaucoup plus facile et moins dangereux
d'installer un boîtier vide dans une fenêtre et nous
vous conseillons de procéder ainsi.
Outdoor side
Côté extérieur
12 inches
12 pouces
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents