Introduction
This guide provides instructions for installing, programming and operating the NLS-NQuire350 series
customer information terminal (hereinafter referred to as "the NQuire" or "the terminal").
Chapter Descriptions
Chapter 1 About This Guide
Chapter 2 Getting Started
Chapter 3 Basic
Chapter 4 Configuring the NQuire
Chapter 5 Using the NQuire
Chapter 6 ESC Commands
Chapter 7 System Update
Chapter 8 ADB Debug
Chapter 9 Using an External Barcode Scanner Describes how to configure an external handheld barcode scanner to
Chapter 10 Maintenance & Troubleshooting
Chapter 11 Safety Information
Appendix
Chapter 1 About This Guide
Provides general description of this manual.
Provides information on getting the NQuire up and running for the first
time.
Describes how to program the NQuire for the use of its basic features
Describe how to program the NQuire with a web-based tool and with
barcodes.
Explains how to scan barcodes, read RFID tags and use a GPIO
device.
Explains how to control the NQuire with ESC commands.
Introduces two methods to update system.
Describes how to use the ADB tool.
work with the NQuire.
Provides maintenance tips and troubleshooting solutions for issues
that might occur when using the NQuire.
Provides safety instructions for the use of the NQuire and its
accessories.
Provides some sample barcodes for the user to test the NQuire.
1