Furuno VR-7000 Instruction Manual page 76

7. SETTING FOR SENSOR ADAPTER
8. Check the checkbox of [Channel No.] to set the items referring to the table shown
below.
Item
Sensor
Name
Data Type
Data Cate-
gory
Details
9. Click [Analog Input] on the menu bar.
"Channel 01" to "Channel 15" are shown on the display. Each sensor adapter MC-
3010A has three input ports. When one sensor adapter MC-3010A is connected
to the MC-3000S, "Channel 01" to "Channel 03" can be used. When five sensor
adapters MC-3010A are connected, "Channel 01" to "Channel 15" can be used.
The connector no. on the MC-3010A board and corresponding serial port no. are
shown below.
7-6
Enter an appropriate name that indicates sensor's function.
Sets the contact input. No use on VR-7000.
Sets the data category. No use on VR-7000.
Enter the interval to monitor the digital input to [Control Interval
(sec)]. Setting range: 1 to 10 (sec).
For other setting options ([Sensor Type No.], [Data name], and [Cal-
ibration Active]), keep the default settings.
No.1 MC-3010A
Connector No.
J3
J4
J5
No.2 MC-3010A
Connector No.
J3
J4
J5
Remarks
Channel No.
Channel 01
Channel 02
Channel 03
Channel No.
Channel 04
Channel 05
Channel 06