Alerts - Furuno VR-7000 Instruction Manual

2.7

Alerts

Alert status is provided in the [Alert] tab.
The [Alert] tab shows the following information about alerts. The list can be sorted by
time, category or name. Click respective column title to sort.
[Time] : Time of alert
[Category] : Alert category
[Priority] : Priority of the alert ( [Alarm] , [Warning] , [Caution] )
[Name] : Name of alert
[Number] : Alert number
[Status] : Alert status
Alert search
1. Click the [Search] button above the [Alert] tab to show the [Search] dialog box.
2. Add a checkmark to any desired search items (multiple items can be selected).
[Start Time] : Set start time to search.
[End Time] : Set end time to search.
[Name] *: Enter name of alert to search.
[Number] *: Display information for alert number entered.
[Status] : Select alert status to search. N, Normal state; V, active - unacknowl-
edged; S, active - silenced; A, active - acknowledged or active; U, rectified - un-
acknowledged; O, active - responsibility transferred
* Can be used for wild card search.
3. Input search data for the checked items. [Name] and [Number] must agree in
order to search.
4. Click the [Search] Button.
Close the [Search] box to cancel a search.
Note: The mode changes from [Play] to [Search] when doing a search.
2. SOFTWARE CONFIGURATION
2-17